(MQQSC006) Quartz Screw-Top Cuvette, 3 mm path, Large Screw Opening, Pack of 2
$718.00
Quartz screw-top cuvette for UV/Vis work with a 3 mm optical path, Four-Way Light access and a 1050 µL nominal capacity. The large screw opening gives direct top filling and covered sample handling with the supplied closures. Sold as a pack of 2 cuvettes with accompanying closures.
In Stock
Description
MQQSC006 is a quartz Screw-Top Cuvette for UV/Vis work with a 3 mm optical path, Four-Way Light configuration and a 1050 µL nominal capacity. Its removable screw-cap opening gives direct access for filling, rinsing and recapping, making it a practical choice when you need short-path measurement with covered sample handling. This listing is sold as a pack of 2 cuvettes with accompanying closures.
- Path Length
- 3 mm
- Sample Volume (Nominal)
- 1.05 mL
- Closure Type
- Screw Cap
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 3 mm |
| Light Transmission Configuration | Four-Way Light |
| Sample Volume (Nominal) | 1.05 mL |
| Material | Quartz |
| Closure Type | Screw Cap |
| Closure Included | Yes |
| Fabrication Method | Molded 0.01 |
| Sales Unit | pack of 2 |
| Package Contents | 2 × Quartz Screw-Top Cuvette; Accompanying closures |
Choose this option
Choose MQQSC006 when your method uses a 3 mm path and you want a screw-top format rather than an open-top cell. The Four-Way Light layout is useful where your setup needs optical access through more than two sides, and the large opening helps with loading and cleaning from above. This version is also the Molded 0.01 option within this screw-top series.
What makes this option different
- 3 mm optical path for methods that require a shorter transmission distance.
- Four-Way Light configuration for optical access through multiple side faces.
- Large screw-top opening for direct sample access and covered handling.
- 1050 µL nominal capacity for the stated cell geometry.
- Sold as a pack of 2, with accompanying closures included.
Using this cell
Fill the cell so the liquid fully covers the illuminated region of your instrument, then fit the supplied closure before measurement. Use the 3 mm path length in your method and concentration calculations, and keep the same orientation for blank and sample measurements.
After filling, remove visible bubbles from the optical path and wipe off exterior droplets before placing the cell in the holder. Handle the cuvette by non-optical surfaces where possible to keep the light path clear of fingerprints and residue.
First-use check
- Inspect the optical faces and sample chamber for chips, residue or transit damage.
- Test holder fit and beam alignment with an appropriate blank before routine measurements.
- Check that the filled liquid level covers the illuminated region without bubbles in the light path.
Fit and optical alignment
View the English selection reference for the available geometry drawing. Before ordering, compare your holder space, beam position and top clearance with the actual cell and cap arrangement.
Z Height is not stated for this SKU, so instrument fit should be checked against your holder or beam-position requirement rather than assumed from the general shape. Leave clearance above the cell for fitting and removing the screw cap. The closure is for sample access and closure, not a stated pressure-rated fitting.
Solvents and cleaning
Molded 0.01 is the option to consider when your method calls for closely specified optical-path precision. For the 3 mm path on this cell, agree the required tolerance and measurement conditions for the order.
For solvent-based or heated work, check the compatibility of the complete assembly, including the closure, under your actual operating conditions.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the optical faces gently with non-abrasive optical tissue or another suitable non-scratching laboratory wipe.
Included with this option
2 Quartz Screw-Top Cuvettes with accompanying closures. The listed price is for the pack of 2.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We can review custom JGS1 quartz requirements related to path length, capacity, external envelope, optical windows, Z Height, closure details, fabrication and tolerance targets. Prototype batches typically involve 2–4 cells, with feasibility, final specification, quantity, price and production time confirmed for the project.
Send a product-selection enquiry with SKU MQQSC006, your holder or instrument details, sample conditions and required quantity.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.
You may also like…
Related products
15%
(MQC365) Quartz Capillary Tubes (Square), Outer Dim.: 0.95×0.95mm, Inner Dim.: 0.35×0.35mm, Length: 50mm
Original price was: $28.00.$24.00Current price is: $24.00.14%
(MQC375) Quartz Capillary Tubes (Square), Outer Dim.: 1.8×1.8mm, Inner Dim.: 0.25×0.25mm, Length: 100mm
Original price was: $38.00.$33.00Current price is: $33.00.11%
(MQC377) Quartz Capillary Tubes (Square), Outer Dim.: 1x1mm, Inner Dim.: 0.6×0.6mm, Length: 25mm
Original price was: $19.00.$17.00Current price is: $17.00.14%
Reviews
There are no reviews yet.