Site Navigation

(MQQMC006) Quartz Micro Cuvette, 30 mm path, 5 mm Slit and Double-Slope Bottom

Weight50 g
SKU: MQQMC006

$252.00

In Stock

JGS1 quartz Micro Cuvette with a 30 mm optical path, Two-Way Light layout, 5 mm slit and double-slope bottom for UV/Vis work. The open-top body is sold as 1 piece.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQMC006 is a JGS1 quartz Micro Cuvette with a 30 mm optical path, a 5 mm slit and a double-slope bottom in an open-top body. It is suited to UV/Vis methods that need a longer path in a compact cell with a more specific internal geometry than a simple square micro cuvette. This listing is sold as 1 piece.

Path Length
30 mm
Cell Type
Micro Cuvette
Opening Configuration
Open Top

Selection Specifications

Product KindCuvette
Cell TypeMicro Cuvette
Measurement ModeUV/Vis Spectroscopy
Path Length30 mm
Light Transmission ConfigurationTwo-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
External Dimensions32.5 × 12.5 × 45 mm
Cell Body Dimensions32.5 × 12.5 × 45 mm
External Dimensions ScopeBody Only
Body Height45 mm
Base Dimensions32.5 × 12.5 mm
MaterialQuartz
Material GradeJGS1
Fabrication MethodStandard 80
Opening ConfigurationOpen Top
Pack Quantity1 Piece
Bottom Thickness2 mm
Package Contents1 × Quartz Micro Cuvette

Choose this option

Choose MQQMC006 when the 30 mm path is the main requirement and your holder can accommodate the longer 32.5 mm body. The 5 mm slit and double-slope bottom are the details that set this option apart, so it is best selected when your method or fixture is meant for this exact cell form rather than a general open-top micro cell.

What makes this option different

  • 30 mm optical path suits UV/Vis methods that need a longer transmission distance.
  • 5 mm slit defines a more specific beam access region than a full-width opening.
  • Double-slope bottom is part of this cell’s stated internal geometry.
  • 32.5 × 12.5 × 45 mm body gives a longer rectangular format that should be checked against holder space.

Structure and dimensions

Product dimensions for checking holder clearance and sample access.
Product dimensions for checking holder clearance and sample access.Open image ↗

Using this cell

Fill from the open top and make sure the measurement region is covered before taking a reading. Keep blank and sample in the same orientation so the beam crosses the same optical direction each time.

The shaped bottom and longer body make stable placement and careful handling more important than with a simple square micro cell. Check for bubbles after filling, and keep the outer optical faces clean and dry before measurement.

First-use check

  1. Inspect the optical faces, upper opening and body edges for chips, dust or residue.
  2. Check holder fit and beam access with a suitable blank before routine use.
  3. Repeat insertion once or twice to confirm stable seating and orientation.

Fit and optical alignment

The body dimensions are 32.5 × 12.5 × 45 mm, and these dimensions apply to the body only. Check holder length as well as width and height clearance, especially if the slot is designed around shorter micro cells.

The stated 2 mm bottom thickness is part of the body geometry, not a beam-center value. Z Height, nominal volume and minimum working volume are not established for this SKU, so do not use overall height or bottom thickness as a substitute for beam alignment or fill planning.

View the English selection reference.

English selection reference
Selection reference ↗

Solvents and cleaning

This cuvette uses Standard 80 adhesive-bonded quartz construction. This type is generally selected for room-temperature water-based samples and buffer solutions.

Avoid organic samples and organic cleaning solvents with this construction. Do not use hydrofluoric acid with quartz, avoid hot strong alkalis and abrasive cleaning methods, and clean the optical faces gently with suitable non-abrasive lab tissue or wipes.

Included with this option

1 Quartz Micro Cuvette. The listed price is for one cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We also coordinate custom JGS1 quartz projects when you need a different path length, body size, opening style or tolerance requirement. If your holder has tight length limits or your method depends on a specific beam height, include those details with your enquiry.

Send a product-selection enquiry with SKU MQQMC006, your holder details, sample conditions, quantity and delivery destination.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQMC006) Quartz Micro Cuvette, 30 mm path, 5 mm Slit and Double-Slope Bottom”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare