(MQQFC140) Quartz Counting Flow Cell, 5 mm path, Flat Oval-Region Counting Cell
$281.00
JGS1 quartz counting flow cell with a 5 mm optical path, a single oval-shaped sample region and two opposed tube connections. The flat 60 × 35 × 6.3 mm body and 2 mm OD / 1 mm ID tube ends define the mounting and plumbing layout. Standard 80 adhesive-bonded construction. One cell supplied.
Description
MQQFC140 is a quartz counting flow cell for flow-counting work that uses a 5 mm optical path in a flat single-channel body. This JGS1 quartz cell combines a Two-Way Light layout with two opposed tube connections, making it useful when you need a defined plate-style flow-cell format and want to plan the optical path, body size and tubing together.
- Path Length
- 5 mm
- Cell Type
- Counting Flow Cell
- Opening Configuration
- Single Channel with Two Tube Connections
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Counting Flow Cell |
| Measurement Mode | Flow Counting |
| Path Length | 5 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| External Dimensions | 60 × 6.3 × 35 mm |
| Body Height | 35 mm |
| Base Dimensions | 60 × 6.3 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Tube Outer Diameter (OD) | 2 mm |
| Tube Inner Diameter (ID) | 1 mm |
| Fabrication Method | Standard 80 |
| Opening Configuration | Single Channel with Two Tube Connections |
| Port Layout | End/side connection at the left in the referenced original; Opposite end/side connection at the right in the referenced original |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Counting Flow Cell |
Choose this option
Choose MQQFC140 when your setup calls for a 5 mm path in a single-channel counting flow cell with two tube-connected ends. The flat 60 × 35 × 6.3 mm body can suit plate-style mounting or clamping arrangements, while the 2 mm OD and 1 mm ID tube ends give you a clear starting point for matching the fluid line.
What makes this option different
- 5 mm optical path for methods built around this fixed path length.
- Single channel with two opposed tube connections for a straightforward in-line flow route.
- Flat 60 × 35 × 6.3 mm body suited to plate-style mounting or holder layouts.
- 2 mm OD / 1 mm ID tube size to help match tubing and connection hardware.
Using this cell
Install the cell with the quartz body supported, not suspended by the tubes. Connect the fluid line carefully, then fill slowly so the sample reaches the optical region without trapping bubbles.
Before measurement, run a blank under the same flow arrangement you will use for the sample. Keep the exterior optical faces clean and dry, and check the full assembly before applying your operating flow conditions.
No pressure rating is stated for this cell. Review the operating pressure and connection method before using it in a pressurized circuit.
First-use check
- Inspect the optical faces and tube ends for damage or contamination.
- Check that the body seats securely in the intended holder without stressing the tubes.
- Fill with a suitable blank, remove visible bubbles and confirm beam alignment before routine use.
Fit and optical alignment
View the English selection reference.
The stated 60 × 35 × 6.3 mm size describes the bare quartz body. Allow extra clearance for the projecting tube connections, attached tubing and bend radius beyond the cell body.
This is a Two-Way Light cell. Align the beam with the intended transmission axis and make sure the holder supports the flat body without stressing the tube ends. Z Height is not listed for this item, so beam height should be checked against your holder or optical bench before ordering for a fixed-alignment setup.

Solvents and cleaning
This cell is made in Standard 80 adhesive-bonded quartz construction. It suits routine room-temperature aqueous samples and buffers.
Avoid organic samples and organic cleaning solvents with this bonded assembly. If your method uses organic solvents or heated treatment, ask about a suitable Sintered or Molded alternative before ordering.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the optical faces gently with non-abrasive optical tissue and use cleaning liquids that are suitable for the complete bonded assembly.
Included with this option
1 Quartz Counting Flow Cell.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes involving path length, body size, channel layout, tube connections, fabrication and related tolerances. Send your drawing or holder details, sample conditions, quantity and delivery destination through our contact page with SKU MQQFC140.
Design notes for this configuration: Oval-Region Quartz Flow Cell: A Broad Viewing Layout with Side Connections
Additional information
| Weight | 150 g |
|---|
You must be logged in to post a review.









Reviews
There are no reviews yet.