(MQQSC002) Quartz Screw-Top Cuvette, 3 mm path, Large Screw Opening, Pack of 2
Description
MQQSC002 is a JGS1 quartz screw-top cuvette for UV/Vis measurements that use a 3 mm optical path. Its M10 screw-cap format gives direct top access for filling and cleaning, while the Two-Way Light layout keeps the measurement path on two opposing optical faces. This option has a 1050 µL nominal capacity and is sold as a pack of 2 with accompanying closures.
- Path Length
- 3 mm
- Sample Volume (Nominal)
- 1.05 mL
- Closure Type
- Screw Cap
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 3 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 1.05 mL |
| Cell Body Dimensions | 12.5 × 5.5 × 35 mm |
| Overall Height without Closure | 53 mm |
| Body Height | 35 mm |
| Overall Height with Closure | 58 mm |
| Base Dimensions | 12.5 × 5.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Screw Cap |
| Closure Included | Yes |
| Port Thread | M10 |
| Fabrication Method | Molded 83 |
| Sales Unit | pack of 2 |
| Package Contents | 2 × Quartz Screw-Top Cuvette; Accompanying closures |
Choose this option
Choose MQQSC002 when you need a short-path UV/Vis cuvette in a closed screw-cap format rather than an open-top cell. The 3 mm path suits methods written for that path length, and the 1050 µL nominal capacity gives a practical reference for sample preparation and rinse planning. The screw-cap access is useful when you want to fill from above and close the cell before handling or measurement.
What makes this option different
- 3 mm optical path for UV/Vis methods specified for a short path length.
- Two-Way Light configuration for measurements taken through two opposing optical faces.
- M10 screw-cap opening for direct top filling and closure access.
- Pack of 2 supplied with accompanying closures as the listed sale unit.
- 1050 µL nominal capacity to help plan sample and rinse volumes.
Using this cell
Fill the cuvette through the top opening and fit the supplied closure as required by your procedure. Keep the optical faces clean, and place the cell in a consistent orientation for blank and sample runs.
The 1050 µL figure is a nominal capacity for the cell. It should not be treated as a minimum working volume, so low-fill methods should be checked against the illuminated region in your own setup.
First-use check
- Inspect the optical faces and sample chamber for residue, chips or shipping contamination.
- Check that the cell seats correctly in your holder and that the beam passes through the intended optical faces.
- Run a blank after filling, making sure bubbles and exterior droplets are removed.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
The optical body height is 35 mm, the overall height with cap is 58 mm, and the base section is 12.5 × 5.5 mm. Allow extra clearance above the holder for the neck and for removing or refitting the screw cap.
Z Height is not established for this SKU. If your instrument uses a fixed beam position or a tightly defined holder geometry, please check that fit before ordering.

Solvents and cleaning
Molded 83 is used for this cuvette configuration. This fabrication style is commonly chosen for methods that may involve organic solvents, but suitability depends on the complete assembled cell, including the closure.
If your application involves aggressive chemicals, elevated temperature or long contact time, please check the exact assembly for that use. Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaning materials, and clean the optical faces gently with non-abrasive optical tissue or a similarly soft laboratory wipe.
Included with this option
2 Quartz Screw-Top Cuvettes and accompanying closures. The listed price is for the pack of 2.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving path length, nominal capacity, external envelope, opening style, optical layout, fabrication and tolerance needs. If your holder has a fixed beam position, include that information with any drawing or sketch because Z Height is not established for this listed SKU.
Send a product-selection enquiry with SKU MQQSC002, your holder or instrument details, sample conditions, required quantity and delivery destination.
Additional information
| Weight | 200 g |
|---|
You must be logged in to post a review.











Reviews
There are no reviews yet.