(MQQSC044) Quartz Screw-Top Cuvette, 10 mm path, Square-Base Version
Description
MQQSC044 is a JGS1 quartz screw-top cuvette for UV/Vis spectroscopy with a 10 mm optical path, five-way light access and a 3.5 mL nominal capacity. The square-base body helps when your holder is designed around a 12.5 × 12.5 mm support format, while the screw-top opening keeps sample loading and closure at the top of the cell.
This version includes an accompanying PTFE closure and is sold as one piece. The optical body height and the overall capped height are different, so both matter when you check instrument clearance.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 3.5 mL
- Opening Configuration
- Screw-Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Five-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 3.5 mL |
| External Dimensions | 12.5 × 12.5 × 38 mm |
| Body Height | 38 mm |
| Overall Height with Closure | 58 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Screw Cap |
| Closure Material | PTFE |
| Closure Included | Yes |
| Fabrication Method | Molded 83 |
| Opening Configuration | Screw-Top |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Screw-Top Cuvette; Accompanying closure |
Choose this option
Choose MQQSC044 when you need a 10 mm UV/Vis quartz cuvette with a square base and a screw-top opening rather than an open-top format. The five-way light layout is useful when your setup needs optical access beyond two opposite faces, and the included PTFE closure suits workflows where you want to fill from above and then close the cell for handling.
What makes this option different
- 10 mm optical path: suited to methods built around this established path length and fixed cell orientation.
- Five-way light access: additional optical access around the chamber beyond a simple two-window arrangement.
- Square-base body: sized for holders that accept a 12.5 × 12.5 mm base format.
- Screw-top opening with PTFE closure included: top loading and closure are built into the working format of the cell.
Structure and dimensions

Using this cell
Load the sample through the top opening, then fit the PTFE closure as required by your procedure. Keep the cuvette orientation consistent between blank and sample so the same optical faces remain in use throughout the run.
Before measurement, make sure the illuminated region is covered and remove visible bubbles from the active optical area. After filling, check the outside faces for droplets or fingerprints before placing the cell in the holder.
First-use check
- Inspect the optical faces, base and closure seating area before first use.
- Test the holder fit and beam alignment with a suitable blank in the intended orientation.
- Confirm that the closure can be fitted and removed without interference from the holder or instrument cover.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
The bare body is 12.5 × 12.5 × 38 mm, and the overall height with cap is 58 mm. Check both the holder cavity and the space above the holder needed to fit or remove the closure, because the cap and neck extend beyond the body dimensions.
Z Height is not established for this SKU. If your instrument depends on a specific beam-center height, verify that requirement before ordering.

Solvents and cleaning
Molded 83 quartz is often selected for methods involving organic solvents or elevated-temperature work, but the exact chemical limits of this assembled cell are not established here.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning materials. If your sample or cleaning routine is demanding, review the exact liquid, concentration, temperature, contact time and closure with us before use.
Included with this option
1 Quartz Screw-Top Cuvette with accompanying PTFE closure. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows, closures and tolerances. Modified designs and prototype batches are quoted separately from the listed SKU.
Send a product-selection enquiry with SKU MQQSC044, your holder details or drawing, sample conditions, quantity and delivery destination.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.










Reviews
There are no reviews yet.