(MQQSC046) Quartz Screw-Top Cuvette, 10 mm path, 50 mm Height with Cap
$180.00
MQQSC046 is a JGS1 quartz screw-top cuvette for UV/Vis work, with a 10 mm optical path, Two-Way Light layout and 3 mL nominal capacity. Its M10 screw-top opening and included PTFE closure suit methods that need a capped sample cell rather than an open-top format. The listed price is for 1 piece.
Description
MQQSC046 is a JGS1 quartz screw-top cuvette for UV/Vis spectroscopy with a 10 mm optical path and 3 mL nominal capacity. Its Two-Way Light layout, M10 screw-top opening and included PTFE closure make it a practical choice when you want a covered quartz sample cell with direct top filling. The listed price is for 1 piece.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 3 mL
- Opening Configuration
- Screw-Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 3 mL |
| External Dimensions | 12.5 × 12.5 × 32 mm |
| Body Height | 32 mm |
| Overall Height with Closure | 50 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Screw Cap |
| Closure Material | PTFE |
| Closure Included | Yes |
| Port Thread | M10 |
| Fabrication Method | Molded 83 |
| Opening Configuration | Screw-Top |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Screw-Top Cuvette; Accompanying closure |
Choose this option
Choose MQQSC046 when your method uses a 10 mm transmission path and you want a screw-cap quartz cell instead of an open-top cuvette. The M10 threaded opening helps you identify the closure connection at the top, and the capped format is useful when you want the sample chamber covered during handling and measurement. It is intended for UV/Vis use in a standard square-body footprint, with top clearance checked as part of instrument fit.
What makes this option different
- 10 mm optical path in a Two-Way Light transmission layout for UV/Vis work.
- M10 screw-top opening for direct top filling with a defined threaded closure connection.
- PTFE closure included so the listed item is supplied as a complete capped cell.
- 50 mm overall height with cap with a shorter 32 mm body, so top clearance matters separately from holder depth.
- Molded 83 fabrication in the current MQ terminology for this SKU.
Structure and dimensions

Using this cell
Fill from the top opening and seat the closure as needed for your measurement routine. During use, keep the same optical orientation for blank and sample, and make sure the liquid level covers the illuminated region used by your instrument.
Before measurement, remove visible bubbles and wipe the outer optical faces clean. The M10 thread identifies the top closure connection, but it does not by itself indicate a pressure-rated fitting or define closed-circuit performance.
First-use check
- Inspect the optical faces, threaded opening and closure seating surfaces before first use.
- Place the cell in the holder with a suitable blank and verify beam alignment in the intended orientation.
- After filling, check for bubbles, exterior droplets and secure cap seating before starting the measurement.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
The base is 12.5 × 12.5 mm, and the quoted 32 mm body height refers to the bare body. The assembled height is 50 mm with the cap fitted, so check both holder seating and the vertical space needed for the cap area.
Z Height is not established for this SKU, so instrument fit should be checked against your beam position rather than assumed from the outside dimensions alone.

Solvents and cleaning
Molded 83 quartz is commonly selected for methods that may involve organic solvents or heated conditions, but suitability still depends on the complete assembly, including the closure and the actual liquid conditions. The exact chemical limits for this SKU are not listed here for specific solvents, concentrations or temperatures.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning materials, and clean the optical faces gently with non-abrasive tissue or other suitable lab wipes.
Included with this option
1 Quartz Screw-Top Cuvette and the accompanying closure. The listed price is for 1 piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes involving dimensions, optical path length, sample volume, openings, closures and fabrication requirements. If you need a different envelope or holder fit, send a labelled drawing or sketch together with the critical dimensions, application wavelength, sample conditions and target quantity.
Send a product-selection enquiry with SKU MQQSC046, your holder or drawing details, sample chemistry, quantity and delivery destination.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.