Site Navigation

(MQQMC071) Glass Micro Cuvette, 10 mm Path, 350 µL, Two-Way Light

Weight50 g
SKU: MQQMC071

$21.00

In Stock

Glass Micro Cuvette for visible-light measurements, with a 10 mm optical path, Two-Way Light layout and 350 µL nominal capacity. This 1 mm slit version suits methods that need a narrow illuminated sample region in a compact micro-cell format. Supplied as 1 piece with caps and protective packaging.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQMC071 is a glass Micro Cuvette for visible-light measurement where you need a standard 10 mm optical path in a small-volume format. This version combines a 350 µL nominal capacity with a 1 mm slit and a Two-Way Light layout, making it a practical choice when your method uses straight-through transmission and a narrow sample region.

Path Length
10 mm
Sample Volume (Nominal)
350 µL
Opening Configuration
Open Top

Selection Specifications

Product KindCuvette
Cell TypeMicro Cuvette
Measurement ModeVisible Spectroscopy
Path Length10 mm
Light Transmission ConfigurationTwo-Way Light
Wavelength Range — Lower Limit350 nm
Wavelength Range — Upper Limit2000 nm
Sample Volume (Nominal)350 µL
MaterialGlass
Closure TypeLid
Closure IncludedYes
Fabrication MethodStandard 80
Opening ConfigurationOpen Top
Pack Quantity1 Piece
Package Contents1 × Glass micro cuvette; Caps and protective packaging

Choose this option

Choose this cell when your method is limited to visible wavelengths and your setup benefits from a compact chamber with a 10 mm path. The 1 mm slit is the key format detail here: it matters when you are working with a narrowly positioned beam or when you want to keep the illuminated region tight within the micro-cell geometry.

What makes this option different

  • 1 mm slit: a narrow sample region that should be checked against your beam size and alignment.
  • 350 µL nominal capacity: a compact chamber volume for this 10 mm path micro cuvette.
  • Two-Way Light layout: arranged for transmission through one opposing pair of optical faces.
  • Visible-light use: intended for visible spectroscopy rather than UV work.

Using this cell

Fill from the open top and keep the cell orientation consistent between blank and sample measurements. Before reading, make sure the liquid covers the illuminated region and remove bubbles or droplets from the outer optical faces.

The cap is useful for routine handling after filling, but this open-top micro cuvette should not be treated as a pressure-rated or fully sealed assembly. The 350 µL figure is the nominal cell capacity, not a stated minimum working volume.

First-use check

  1. Inspect the cell, optical faces and rim for chips, residue or handling marks.
  2. Seat the cuvette in the holder and run a suitable blank at your measurement wavelength.
  3. After filling, confirm that the beam region is covered and free from bubbles.

Fit and optical alignment

View the English selection reference for this slit, path and pack option.

This 1 mm slit version should be matched to your holder and beam footprint with care. A narrow slit can be useful, but it also makes beam placement more dependent on correct seating and alignment.

Z Height is not established for this SKU, so if your instrument has a fixed beam position or a tightly defined micro-cell holder, check those details before ordering.

English selection reference
Selection reference ↗

Solvents and cleaning

This adhesive-bonded glass cuvette is listed as Standard 80. For this construction, glass is paired with bonded joints, so it is best suited to routine room-temperature aqueous samples and buffer-based methods. If your work involves organic solvents, aggressive reagents, heated cleaning or long chemical contact, check suitability before use.

Keep hydrofluoric acid away from glass. Avoid hot strong alkalis and abrasive cleaning methods, and wipe the optical faces gently with non-abrasive optical tissue.

Included with this option

1 glass micro cuvette, with caps and protective packaging. The listed price is for one cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different material or geometry, we can review a custom JGS1 quartz version separately from this listed glass SKU. Send your required path length, sample volume, holder details, critical dimensions and target quantity through our contact page.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQMC071) Glass Micro Cuvette, 10 mm Path, 350 µL, Two-Way Light”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare