(MQQIR006) Quartz Standard Cuvette, 47.5 mm path, 10 mL nominal capacity, Long-Path JGS3 Cell
Description
MQQIR006 is a JGS3 quartz standard cuvette for infrared spectroscopy with a 47.5 mm optical path and 10 mL nominal capacity. It combines straight-through Two-Way Light access with an open-top sample chamber in a 50 × 12.5 × 30 mm body, which is useful when you need a long optical path but do not want the taller body format used by many standard cells.
- Path Length
- 47.5 mm
- Sample Volume (Nominal)
- 10 mL
- Opening Configuration
- Open Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Standard Cuvette |
| Measurement Mode | Infrared Spectroscopy |
| Path Length | 47.5 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 260 nm |
| Sample Volume (Nominal) | 10 mL |
| External Dimensions | 50 × 12.5 × 30 mm |
| Body Height | 30 mm |
| Base Dimensions | 50 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS3 |
| Opening Configuration | Open Top |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Standard Cuvette |
Choose this option
Choose MQQIR006 when your method needs a long fixed transmission path with direct filling from above. The open top lets you pipette, inspect and empty the sample chamber directly, while the 30 mm body height is the detail to check if your holder, beam position or surrounding fixture has limited vertical clearance.
What makes this option different
- 47.5 mm optical path for long-path transmission measurements in a single rigid cell body.
- Two-Way Light layout for a straight optical path through two opposing faces.
- Open-top access for direct filling, liquid-level checking and cleaning access from above.
- 10 mL nominal capacity suited to methods that use a larger filled sample volume in a long-path cell.
- 50 × 12.5 × 30 mm body with a lower body height than many taller cuvette formats.
- JGS3 quartz specified here for infrared spectroscopy use.
Using this cell
Fill the cell from the top and make sure the sample covers the illuminated region used by your instrument. For long-path work, remove visible bubbles before measurement and keep the same orientation for blank and sample runs.
The 10 mL value is the nominal cell capacity, not a stated minimum working volume. If your beam height is fixed or your method uses a lower fill level, check the actual liquid coverage in your holder before routine use.
First-use check
- Inspect the optical faces and sample chamber for chips, dust or residue.
- Place the empty cell in the holder and confirm that it seats properly and clears nearby hardware.
- Run a blank in the same orientation you will use for the sample.
- After filling, confirm that the illuminated region is fully covered and free of bubbles.
Fit and optical alignment
View the English selection reference.
Check the full body size as well as the path length. This model uses a 50 mm body length with a 47.5 mm optical path, so the optical direction is close to the full body length rather than a shorter internal path. The 30 mm body height can help in compact fixtures, but it also means beam position should be checked carefully.
Z Height is not stated for this item. If your spectrometer or holder depends on a defined beam-center height, compare against your current cell or fixture before ordering.

Solvents and cleaning
Compare fabrication options if your method involves demanding sample chemistry or cleaning steps. This SKU is described with fused-integrated construction in the supplier wording, but a controlled MQ fabrication grade is not established here, so chemical compatibility should be checked from the actual sample liquid, concentration, temperature and cleaning routine rather than assumed from a grade label.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning materials. Clean the optical faces gently with suitable non-abrasive laboratory wipes and an appropriate cleaning liquid for your procedure.
Included with this option
1 Quartz Standard Cuvette (MQQIR006).
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
If you need a different body size, optical path, opening style or holder fit, send your drawing or a labelled sketch with the critical dimensions. For holder-based applications, it is helpful to include beam position, support geometry, sample conditions and your target date.
Send a product-selection enquiry with SKU MQQIR006 and your fit or application details.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.







Reviews
There are no reviews yet.