(MQQSC021) Quartz Screw-Top Cuvette, 2 mm path, 700 µL nominal capacity, JGS3 Short-Path Cell
$713.00
MQQSC021 is a JGS3 quartz screw-top cuvette for infrared spectroscopy with a 2 mm optical path, Four-Way Light layout and 700 µL nominal capacity. It combines short-path measurement geometry with top filling and an included PTFE screw cap in a compact enclosed format. Sold as 1 piece with accompanying closure.
Description
MQQSC021 is a JGS3 quartz screw-top cuvette for infrared spectroscopy with a 2 mm optical path, Four-Way Light layout and 700 µL nominal capacity. It is a practical choice when you want a short-path quartz cell that fills from the top, closes with a screw cap and still provides optical access from four sides of the cell body.
- Path Length
- 2 mm
- Sample Volume (Nominal)
- 700 µL
- Closure Type
- Screw Cap
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | Infrared Spectroscopy |
| Path Length | 2 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 260 nm |
| Wavelength Range — Upper Limit | 3500 nm |
| Sample Volume (Nominal) | 700 µL |
| Body Height | 35 mm |
| Overall Height with Closure | 58 mm |
| Base Dimensions | 12.5 × 4.5 mm |
| Material | Quartz |
| Material Grade | JGS3 |
| Closure Type | Screw Cap |
| Closure Material | PTFE |
| Closure Included | Yes |
| Fabrication Method | Molded 83 |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Screw-Top Cuvette; Accompanying closure |
Choose this option
Choose MQQSC021 when your method calls for a 2 mm path in a capped quartz cell and you want enclosed sample handling rather than an open-top chamber. This option balances short-path measurement, direct top filling and four-side optical access in a compact body that is still easy to place in many holder formats.
What makes this option different
- 2 mm optical path for short-path infrared measurements.
- Four-Way Light configuration with optical access from four sides of the cuvette body.
- 700 µL nominal capacity in a screw-top enclosed format.
- PTFE screw cap included with the listed single-piece sale unit.
- Compact base profile of 12.5 × 4.5 mm for holder-fit planning.
Using this cell
Introduce the sample through the screw-top opening, then seat the cap before measurement. Use a consistent orientation for blank and sample so the same optical faces and path direction are maintained throughout the method.
The 700 µL figure is a nominal capacity, not a stated minimum working volume. Fill high enough to cover the beam area in your own setup and check that no bubbles remain in the sample region before measurement.
First-use check
- Inspect the optical faces, opening and cap seating area before first use.
- Place the cell in the holder and confirm that the intended optical faces line up with the beam.
- Run a blank in the same orientation and with the same fill approach planned for the sample.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
The base dimensions are 12.5 × 4.5 mm, the body height is 35 mm, and the overall height with cap is 58 mm. Check these against your holder slot, insertion depth and top clearance, especially if the cap area sits close to a lid, clamp or compartment cover.
View the English dimensional reference. The reference is also available in the product gallery. Z Height is not established for this SKU, so beam-center compatibility should be checked before purchase if your instrument depends on a defined beam height.

Solvents and cleaning
This cuvette uses Molded 83 fabrication, a construction often chosen for quartz cuvette work involving organic-solvent methods or elevated-temperature applications. The exact chemical limits of this assembled SKU are not established here, so aggressive chemicals, heated liquids and long contact times should be reviewed for the complete assembly, including the PTFE closure.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaners. Clean the optical faces gently with suitable non-abrasive optical tissue or wipes.
Included with this option
1 Quartz Screw-Top Cuvette and accompanying closure. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication details. Send your holder information, a labelled sketch or drawing, the required optical direction, sample conditions and target quantity for review.
Send a product-selection enquiry with SKU MQQSC021 and your application details.
Additional information
| Weight | 75 g |
|---|
You must be logged in to post a review.











Reviews
There are no reviews yet.