Site Navigation

(MQQPA010) Plastic Particle Analysis Cell, Reduced-Volume Measurement Region, Pack of 2

Weight100 g
SKU: MQQPA010

$33.00

In Stock

MQQPA010 is a plastic particle analysis cell with a 10 mm optical path, a 40 µL nominal volume and a flat lid for direct top filling. Its one-piece plastic molding and compact 12 × 12 mm cell format suit methods built around this reduced-volume measurement region. Sold as a pack of 2 cells with accompanying closures.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQPA010 is a plastic particle analysis cell for methods that use a 10 mm optical path in a compact cell format. Its 40 µL nominal volume, flat-lid access and one-piece plastic molding make it a practical option when you need a small sample region with straightforward top filling and handling. This option is sold as a pack of 2 cells with accompanying closures.

Path Length
10 mm
Sample Volume (Nominal)
40 µL
Closure Type
Flat Lid

Selection Specifications

Product KindSpecialized Cell
Cell TypeParticle Analysis Cell
Measurement ModeParticle Analysis
Path Length10 mm
Sample Volume (Nominal)40 µL
External Dimensions12 × 12 × 45 mm
Body Height45 mm
Base Dimensions12 × 12 mm
MaterialPlastic
Closure TypeFlat Lid
Closure IncludedYes
Sales Unitpack of 2
Package Contents2 × Plastic Particle Analysis Cell; Accompanying closures

Choose this option

Choose MQQPA010 when your method is built around this particle analysis cell style and you need the same path length, outer format and reduced nominal capacity. The 10 mm path supports setups that already use this optical length, while the 40 µL nominal volume points to a small sample region rather than a larger standard cell body. The flat lid also matters in daily use, because filling and lid placement happen from above and need working clearance over the cell.

What makes this option different

  • 10 mm optical path suits methods set up for this path length in a particle analysis cell format.
  • 40 µL nominal volume identifies a reduced-capacity sample region for small-volume work; this is a nominal capacity, not a stated minimum working fill.
  • Flat lid access allows direct top filling and sample handling, so you should leave space above the cell for pipetting and lid placement.
  • One-piece plastic molding means the body is supplied as a molded plastic cell rather than a multi-part quartz fabrication grade, which is relevant when you are matching an existing plastic cell routine.
  • 12 × 12 mm base format helps the cell sit in holders designed around this footprint.
  • Pack of 2 keeps the sale unit clear for replacement planning and routine use.

Using this cell

Fill the cell from the top and place the flat lid as supplied for your measurement routine. Because this is a small nominal-capacity cell, careful filling matters: avoid trapping bubbles, and keep the outside faces free from droplets, fingerprints and residue before measurement.

For particle analysis work, use a consistent orientation for blank and sample runs. If your method depends on matching an established procedure, keep the same cell style and handling routine across runs.

First-use check

  1. Inspect the cell body, optical faces and lid seating area before first use.
  2. Place the empty or blank-filled cell in the holder and confirm that it seats correctly.
  3. After filling, remove bubbles and exterior droplets before running the blank or sample.

Fit and optical alignment

View the English selection reference. Also available in the product gallery.

The external dimensions are 12 × 12 × 45 mm, with a 12 × 12 mm base. Check holder space, insertion depth and the clearance above the cell for pipette access and lid handling rather than relying on footprint alone.

Z Height is not specified for this SKU. If your instrument depends on a known beam-center height, match the installed beam position against your current cell or holder before routine use.

English selection reference
Selection reference ↗

Solvents and cleaning

Clean with methods suitable for the actual plastic cell and closure assembly. Specific chemical compatibility is not established for this SKU, so check the liquid, concentration, contact time and cleaning agent against your own process before routine use.

Avoid abrasive cleaning and avoid heat unless you have verified suitability for the plastic body and closure assembly. Scratching, swelling or haze can change the optical background.

Included with this option

2 Plastic Particle Analysis Cells with accompanying closures. The listed price is for the pack of 2.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If your application needs a different material or cell geometry, we can review a separate custom project. Send a product-selection enquiry with SKU MQQPA010, your holder or drawing details, sample conditions, required quantity and delivery destination.

Additional information

Weight100 g

Reviews

There are no reviews yet.

Be the first to review “(MQQPA010) Plastic Particle Analysis Cell, Reduced-Volume Measurement Region, Pack of 2”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare