Site Navigation

(MQQPA012) Plastic Particle Analysis Cell, Reduced-Volume Measurement Region, Pack of 10

Weight600 g
SKU: MQQPA012

$162.00

In Stock

MQQPA012 is a plastic particle analysis cell with a 10 mm optical path, 40 µL nominal volume and a flat lid. Its compact 12 × 12 mm footprint suits setups built around this cell format. Sold as a pack of 10 cells with accompanying closures.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQPA012 is a plastic particle analysis cell for methods that use a 10 mm optical path in a compact cell format. The 40 µL nominal volume and flat-lid access suit routines that need the same small sample region across larger sets of measurements. This option is sold as a pack of 10 cells with accompanying closures.

Path Length
10 mm
Sample Volume (Nominal)
40 µL
Closure Type
Flat Lid

Selection Specifications

Product KindSpecialized Cell
Cell TypeParticle Analysis Cell
Measurement ModeParticle Analysis
Path Length10 mm
Sample Volume (Nominal)40 µL
External Dimensions12 × 12 × 45 mm
Body Height45 mm
Base Dimensions12 × 12 mm
MaterialPlastic
Closure TypeFlat Lid
Closure IncludedYes
Sales Unitpack of 10
Package Contents10 × Plastic Particle Analysis Cell; Accompanying closures

Choose this option

Choose MQQPA012 when your workflow already uses this particle analysis cell geometry and you want the same format in a larger routine quantity. The main selection points are the 10 mm path length, the 12 × 12 mm base for holder seating, and the flat lid that suits top filling and handling in this cell style.

What makes this option different

  • 10 mm optical path for particle analysis methods built around this path length.
  • 40 µL nominal volume in a reduced-volume sample region.
  • Flat lid included for top access in the supplied configuration.
  • Pack of 10 with accompanying closures for this listing.

Using this cell

Fill the sample region from the top and place the lid as supplied for your measurement routine. Before measurement, keep the optical faces and outside surfaces clean and free from droplets, fingerprints and residue.

For particle analysis work, consistent handling matters. Prepare blanks and samples in the same cell style, remove bubbles before measurement, and keep the cell orientation repeatable between runs.

First-use check

  1. Inspect the optical faces, sample region and lid seating area before first use.
  2. Place the empty or blank-filled cell in the holder and confirm correct seating.
  3. After filling, remove bubbles and exterior droplets before running the background or sample.

Fit and optical alignment

View the English selection reference. Also available in the product gallery.

The stated outer body size is 12 × 12 × 45 mm, with a 12 × 12 mm base. Check holder fit, insertion space and the top clearance needed for filling and lid handling, especially if you are replacing a different cell style.

Z Height is not specified for this SKU. If your instrument depends on a known beam-center position, verify the installed fit against your holder or current reference cell.

English selection reference
Selection reference ↗

Solvents and cleaning

This is a plastic cell, and specific chemical limits are not established for this exact SKU. Use only liquids and cleaning agents that are suitable for the actual polymer in your process.

Avoid abrasive cleaning and avoid heat unless suitability has been checked for the assembled cell. Surface damage, swelling or haze can affect the optical background and measurement consistency.

Included with this option

10 plastic particle analysis cells with accompanying closures. The listed price is for the pack of 10.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different geometry, we can review a custom project separately from this listed plastic SKU. Send your drawing or holder details, required path length, sample volume, key dimensions, sample conditions and quantity through our contact page.

Additional information

Weight600 g

Reviews

There are no reviews yet.

Be the first to review “(MQQPA012) Plastic Particle Analysis Cell, Reduced-Volume Measurement Region, Pack of 10”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare