Site Navigation

(MQQFC112) JGS1 Quartz Counting Flow Cell, 0.5 mm Path, 40 µL

Weight50 g
SKU: MQQFC112

$186.00

In Stock

JGS1 quartz counting flow cell with a 0.5 mm optical path and 40 µL nominal capacity in a 30 × 4 × 15 mm optical body. Two opposed tubes, sized at 1.5 mm OD / 1 mm ID, connect the small sample region to your flow circuit. Two opposing optical faces support transmission measurement. One cell supplied.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC112 is a JGS1 quartz counting flow cell for UV/Vis work with a 0.5 mm optical path and 40 µL nominal capacity. Its compact optical body and two opposed fluid tubes suit in-line sample handling where you need a short fixed path and a small internal cell volume within the measurement section. This listing is for one cell.

Path Length
0.5 mm
Sample Volume (Nominal)
40 µL
Opening Configuration
Two Opposed Fluid Tubes

Selection Specifications

Product KindFlow Cell
Cell TypeCounting Flow Cell
Measurement ModeUV/Vis Spectroscopy
Path Length0.5 mm
Light Transmission ConfigurationTwo-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)40 µL
Cell Body Dimensions30 × 4 × 15 mm
Body Height15 mm
Base Dimensions30 × 4 mm
MaterialQuartz
Material GradeJGS1
Port Count2
Tube Outer Diameter (OD)1.5 mm
Tube Inner Diameter (ID)1 mm
Fabrication MethodStandard 80
Opening ConfigurationTwo Opposed Fluid Tubes
Port LayoutEnd/side connection at the left in the referenced original; Opposite end/side connection at the right in the referenced original
Pack Quantity1 Piece
Package Contents1 × Quartz Counting Flow Cell

Choose this option

Choose MQQFC112 when your method is built around a 0.5 mm flow-cell path and direct connection to small tubing. The two opposed tube layout helps you plan a straight-through fluid route, while the compact body gives a clear starting point for holder and clearance checks around the optical section.

What makes this option different

  • 0.5 mm optical path for methods that require a short fixed path in a flow cell.
  • 40 µL nominal capacity in a compact counting-cell format.
  • Two opposed fluid tubes with 1.5 mm OD and 1 mm ID for connection planning.
  • JGS1 quartz body for UV/Vis use with a Standard 80 adhesive-bonded construction.

Using this cell

Install the cell by supporting the quartz body rather than pulling on the projecting tubes. Connect your tubing with gentle alignment, then fill and flush the sample path gradually so trapped bubbles can clear before measurement.

Keep the same orientation for blank and sample readings when your setup depends on fixed beam position. The stated 40 µL is the nominal cell volume, not a minimum working volume, so your method should verify full beam coverage under the actual flow and fill conditions you use.

First-use check

  1. Inspect the optical faces and tube ends before connecting the cell.
  2. Fill with a suitable blank and confirm that bubbles clear from the optical region.
  3. Check final mounting clearance for the body, tubes and tubing bends.

Fit and optical alignment

View the English selection reference.

The 30 × 4 × 15 mm dimensions apply to the optical body only. The installed envelope also needs space for the projecting tubes, tubing bends and any connection hardware beyond the body itself.

Z Height is not specified for this SKU. If your instrument or holder depends on a fixed beam-center height, check beam position separately rather than using the 15 mm body height as an alignment value.

Gallery series photographs illustrate the shared cell format. The ordered path length and nominal capacity are the values stated for MQQFC112.

English selection reference
Selection reference ↗

Solvents and cleaning

Standard 80 adhesive-bonded quartz is generally chosen for routine room-temperature aqueous samples and buffers. Avoid organic samples and organic cleaning solvents with this bonded assembly.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning. Clean the exterior optical faces gently with non-abrasive optical tissue. If your method involves organic solvents or heated treatment, ask about a suitable Sintered or Molded alternative before ordering.

Included with this option

1 Quartz Counting Flow Cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application.

Prototype batches typically involve 2–4 cells; the final quantity, feasibility, specifications, price and production time are confirmed in the project quotation. Modified designs and prototype batches are quoted separately from the listed SKU. Send a product-selection enquiry with SKU MQQFC112, your holder details, sample conditions and target quantity.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC112) JGS1 Quartz Counting Flow Cell, 0.5 mm Path, 40 µL”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare