(C1002CE) Quartz Standard Cuvette, 100 mm Path, 35 mL

Weight	100 g

SKU: C1002CE

Original price was: $309.00.Current price is: $279.00.

In Stock

C1002CE is a JGS1 quartz standard cuvette for UV/Vis spectroscopy with a 100 mm optical path, a 35 mL nominal capacity and an open-top body with a PTFE cover. Its Two-Way Light layout suits long-path transmission measurements with direct filling from above. Supplied as 1 cuvette per listed price unit.

In Stock

SKU: C1002CE Categories: Cuvettes, Products, Quartz Standard Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C1002CE is a JGS1 quartz standard cuvette for UV/Vis spectroscopy built around a 100 mm optical path. It combines a 35 mL nominal capacity, an open-top body and an included PTFE cover, giving you a long-path rectangular cell that can be filled directly from above and then covered for routine handling.

This option is intended for setups that already use a long fixed path in a standard cuvette format rather than a flow cell or special sample chamber. The Two-Way Light layout keeps the measurement path to opposing faces, while the uncapped body dimensions help you check whether your holder can accept the full cell length.

Path Length: 100 mm
Sample Volume (Nominal): 35 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Standard Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	100 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	35 mL
External Dimensions	12.5 × 102.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 102.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Material	PTFE
Closure Included	Yes
Fabrication Method	Molded 83
Opening Configuration	Open Top

Choose this option

Choose C1002CE when your method specifically calls for a 100 mm optical path and your instrument can accommodate a long standard cuvette body. The open top is practical for direct sample loading and rinsing, and the included PTFE cover adds a simple top closure without changing the basic rectangular cell format.

What makes this option different

100 mm optical path for methods designed around a long transmission length.
35 mL nominal capacity to match this long-path cell format.
Open-top body with PTFE cover included for direct filling and top coverage during normal handling.
Two-Way Light configuration for straight through-beam optical access rather than side-access geometry.
JGS1 quartz for UV/Vis use across the stated 200–2500 nm range.
12.5 × 102.5 × 45 mm uncapped dimensions for holder and compartment clearance checks.
Optical contact / integrated construction with Molded 83 fabrication mapping for method and cleaning selection.

Using this cell

Load the sample from the top and fill high enough to cover the beam region used in your instrument. Remove bubbles before measurement, and keep the same orientation for blank and sample runs so the beam passes through the same optical faces.

The PTFE cover is supplied for top coverage during routine use, but this remains an open-top cuvette. It should not be treated as a pressure-rated or leak-tight assembly.

First-use check

Inspect the optical faces for dust or residue, test the empty cell in the holder, then run a suitable blank before preparing a full sample series. This is the simplest way to verify beam coverage, practical fill height and top clearance in your own setup.

Fit and optical alignment

The stated 12.5 × 102.5 × 45 mm dimensions describe the uncapped cell body. Check both holder seating and the surrounding space needed to insert, remove and cover the cell, especially in compact sample compartments.

Z Height is not stated for this model. If your instrument depends on a specific beam-center height, confirm that requirement separately rather than relying on external body dimensions alone.

Solvents and cleaning

Molded 83 is commonly considered for organic-solvent methods or applications that may involve heat, but the practical choice still depends on the complete assembly and your actual chemicals, concentration, temperature and contact time. This product page does not establish a full chemical-compatibility or pressure rating for the assembled item.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue.

Included with this option

1 cuvette per listed price unit. Closure included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication details. Discuss your requirements and reference C1002CE.