(C132TS) Quartz Large-Window Cuvette, 13 mm Path, 24 mL

Weight	100 g
Dimensions	5.2 × 1.55 × 6.5 mm

SKU: C132TS

Original price was: $427.00.Current price is: $385.00.

In Stock

C132TS is a JGS1 quartz large-window cuvette with a 13 mm optical path, a 24 mL nominal capacity and an M9 threaded top access. Its Two-Way Light layout suits straight-through transmission measurements across opposing faces, and the larger body format gives more chamber volume than a small cuvette body. Supplied as 1 cuvette per sale.

In Stock

SKU: C132TS Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C132TS is a JGS1 quartz large-window cuvette with a 13 mm optical path, 24 mL nominal capacity and M9 threaded sample access at the top. It is a useful choice when you need a larger sample chamber in a straight-through Two-Way Light format and want a defined threaded opening to plan around during filling, handling and instrument clearance checks.

The quartz body is specified for UV/Vis use from 200 to 2500 nm. This option also uses a supplier-described fused integrated construction, which is relevant if you prefer a fixed assembled cell body rather than a demountable plate-style sample area.

Path Length: 13 mm
Sample Volume (Nominal): 24 mL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Large-Window Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	13 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	24 mL
External Dimensions	52 × 15.5 × 65 mm
Body Height	55 mm
Overall Height with Closure	68 mm
Base Dimensions	52 × 15.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Closure Thread	M9

Choose this option

Choose C132TS when your method needs a 13 mm transmission path in a larger-format quartz cuvette and you want top access defined by an M9 thread instead of an open cup. The 24 mL nominal capacity gives a fuller sample chamber for batch filling, while the capped overall height and wider body format help you judge holder space and top clearance before ordering.

What makes this option different

Two-Way Light layout for transmission through opposing optical faces, with no side-access geometry to plan around.
M9 threaded top access gives a defined opening format for filling and closure handling.
24 mL nominal capacity in a large-window body for methods that use a larger chamber volume.
52 × 15.5 mm base dimensions for holder-width and slot-thickness checks.
55 mm body height and 68 mm overall height with cap for vertical clearance planning.
Supplier-described fused integrated construction, suited to customers looking for a fixed assembled cuvette body rather than a demountable sample-cell arrangement.

Using this cell

Use this cell for straight-through measurements across the two opposing light faces. Fill the chamber so the illuminated region is covered during measurement, then check for bubbles, droplets or residue on the optical faces before placing it in the holder.

The M9 threaded top access matters during routine handling as well as filling. Leave enough space above the cell to reach the opening comfortably, especially if your holder, lid or surrounding accessory frame sits close to the upper part of the cuvette.

The stated 24 mL figure is a nominal capacity, not a minimum working volume. If your method uses partial fills or a low liquid level, check beam coverage in your own setup.

First-use check

Inspect the chamber and optical faces for dust, residue or edge damage.
Test the empty cuvette in your holder and confirm top clearance around the threaded opening.
Run a blank and confirm that the beam passes through the intended faces with stable seating.

Fit and optical alignment

This cuvette has a 52 × 15.5 mm base, a 55 mm body height and a 68 mm overall height with cap. Those dimensions are relevant both at the holder slot and above the holder, where the threaded access and capped height may affect surrounding clearance.

Z Height is not listed for this SKU. If your instrument depends on a specific beam-center height, verify that requirement directly rather than matching by external size alone.

Solvents and cleaning

Quartz supports the stated 200 to 2500 nm wavelength range, but chemical limits for this assembled cuvette are not established here. If your sample, rinse liquid or cleaning routine involves aggressive chemicals, long contact times or elevated temperature, check suitability before use.

The supplier describes this cell as fused integrated construction. That indicates a fixed assembled cuvette body rather than a removable-plate or user-disassembled sample region, so routine handling and cleaning should be planned around the top threaded access and the permanent body geometry. For general background, see the MQ fabrication guide.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials, and wipe optical faces gently with suitable non-abrasive optical tissue.

Included with this option

This sale is for 1 cuvette. The current listing identifies an M9 threaded access and gives an overall height with cap, but the supplied closure itself is not clearly established in the present package information, so please check before ordering if closure inclusion matters for your setup.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes to dimensions, path length, sample volume, optical windows or Z Height, closures and fabrication or tolerance requirements. Send a dimensioned drawing or labelled sketch together with your holder or instrument details, sample conditions and target quantity. For custom enquiries, please contact us and mention part number C132TS.