(C024CR4) Quartz Fluorescence Cuvette, 2 mm Path, 700 µL

Weight	30 g

SKU: C024CR4

Original price was: $142.00.Current price is: $128.00.

In Stock

C024CR4 is a quartz fluorescence cuvette with a 2 mm optical path, Four-Way Light access and 700 µL nominal capacity. Its open-top body allows direct filling, and this sale option includes a closure. Supplied as 1 cuvette per price unit.

In Stock

SKU: C024CR4 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C024CR4 is a quartz fluorescence cuvette for fluorescence spectroscopy with a 2 mm optical path, Four-Way Light body and 700 µL nominal capacity. The open-top format gives direct access for filling, while the included closure covers the opening after loading. This is a practical choice when you need a 2 mm rectangular fluorescence cell with optical access from four sides and a sub-millilitre nominal capacity.

Path Length: 2 mm
Sample Volume (Nominal): 700 µL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Fluorescence Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	2 mm
Light Transmission Configuration	Four-Way Light
Sample Volume (Nominal)	700 µL
External Dimensions	12.5 × 4.5 × 45 mm
Cell Body Dimensions	12.5 × 4.5 × 45 mm
External Dimensions Scope	Body Only
Body Height	45 mm
Base Dimensions	12.5 × 4.5 mm
Material	Quartz
Closure Included	Yes
Opening Configuration	Open Top (Cell Body)

Choose this option

Choose C024CR4 when a 2 mm path length suits your fluorescence method and you want direct top filling rather than a flow connection or demountable structure. The 700 µL nominal capacity places it between very small and larger rectangular cells, which can be useful when you need modest sample volume without moving to a longer cuvette body.

What makes this option different

2 mm optical path for methods built around this fluorescence path length.
Four-Way Light geometry for optical access from all four sides of the cell body.
700 µL nominal capacity in an open-top quartz cell for direct loading.
Closure included with this 1-piece sale unit.

Using this cell

Fill the sample from the open top and keep the optical faces clean in the beam area. After loading, place the closure gently on the opening. If your fluorescence setup relies on a fixed excitation and collection direction, keep the same cell orientation for blank and sample measurements.

This is not described as a sealed, leak-tested or pressure-rated assembly. If your work involves inversion, transport after filling or other handling where liquid retention matters, check the complete setup under your own operating conditions before routine use.

First-use check

Inspect the optical faces and top opening before first use for chips, residue or handling marks. Place the empty cell in the holder to confirm seating and clearance, then run a blank and verify that the beam area remains free of bubbles and visible residue after filling.

Fit and optical alignment

The stated body dimensions are 12.5 × 4.5 × 45 mm, and these dimensions apply to the body only. Check that your holder accepts this width and depth, and leave enough clearance above the holder for filling and closure placement.

Z Height is not specified for this SKU, so do not assume beam-center position from overall height alone. Four-Way Light describes the optical access layout of the cuvette body; final fit still depends on your holder geometry and beam position.

Solvents and cleaning

This cuvette is made from quartz. For a general overview of cuvette construction options, see Compare fabrication options.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the optical faces gently with non-abrasive optical tissue or another non-scratching lab wipe suitable for your procedure.

Included with this option

Supplied as 1 quartz fluorescence cuvette with a closure included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application. Prototype batches typically involve 2–4 cells; final specifications, quantity, price and production time are confirmed in the project quotation. Discuss your requirements and quote part number C024CR4.