(C402CE4) Glass Standard Cuvette, 40 mm Path, 14 mL

Weight	100 g

SKU: C402CE4

Original price was: $29.00.Current price is: $27.00.

In Stock

C402CE4 is a glass standard cuvette with a 40 mm optical path, 14 mL nominal capacity and an included lid for covered handling after filling. It is intended for methods within the stated 350–2000 nm range.

In Stock

SKU: C402CE4 Categories: Cuvettes, Glass Cuvettes, Products Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C402CE4 is a glass standard cuvette with a 40 mm optical path and 14 mL nominal capacity. The included lid gives you a covered format after filling, while the rectangular body keeps the handling style familiar for routine bench use. Its stated wavelength range is 350–2000 nm.

Path Length: 40 mm
Sample Volume (Nominal): 14 mL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Standard Cuvette
Measurement Mode	Absorbance Spectroscopy
Path Length	40 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	350 nm
Wavelength Range — Upper Limit	2000 nm
Sample Volume (Nominal)	14 mL
External Dimensions	42.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	42.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Glass
Closure Type	Lid
Closure Included	Yes

Choose this option

Choose C402CE4 when your method requires a 40 mm path and you want a glass cell supplied with a lid rather than an uncovered open body. The longer path and 14 mL nominal capacity suit this larger sample format, and the lid can be useful when you want to cover the sample between filling and measurement. This option is best for setups that need the lidded configuration but do not rely on a stated sealed or pressure-rated closure.

What makes this option different

40 mm optical path: match the measurement method to this transmission distance and align the beam through the sample region.
14 mL nominal capacity: plan the working fill and beam footprint together so liquid covers the illuminated region; nominal capacity is not a minimum working fill.
Accompanying closure: cover the opening after preparation and allow room to remove it; no pressure or leak-tight rating is specified.
Supplier-described fused integrated construction: keep the body assembled for routine cleaning and rinse through the sample opening, using liquids suitable for the complete glass assembly.

Using this cell

Fill the cell so the liquid level fully covers the measurement beam, then place the lid for handling as needed. Remove visible bubbles before measurement, and keep the same orientation for blank and sample if your procedure depends on repeatable positioning.

The 14 mL figure is a nominal capacity, not a minimum working volume. If you plan to run at a lower fill level, check in your own instrument that the liquid still covers the beam area.

First-use check

Inspect the optical faces and edges for chips, scratches, residue or packing dust before first use. Rinse with a liquid suitable for your method, check that the lid seats properly on the cell, and confirm in the instrument that the filled sample covers the beam position.

Fit and optical alignment

The verified dimensions apply to the uncapped body: 42.5 × 12.5 × 45 mm. Use those dimensions to check holder seating, and allow extra clearance above the cell because the overall size with the lid fitted is not established here.

Z Height is not established for this SKU. If your instrument or holder has a fixed beam height, confirm alignment separately instead of assuming fit from the outer body size alone.

Solvents and cleaning

The supplier records this cuvette as fused integrated construction, which is useful for routine fill-rinse-repeat handling because the cell body is used as a fixed assembly rather than a take-apart sample holder. That matters mainly for operation and cleaning style: you clean and handle it as one assembled glass cell with its lid, not as a disassembled optical set.

Chemical limits are not established here for this exact option, including the full body-and-lid combination. Use non-abrasive cleaning methods, and check your sample and cleaning liquids against your own process requirements before use. For a general overview of cuvette construction options, see Compare fabrication options.

Included with this option

This configuration includes an accompanying closure. Confirm the cell quantity and any separately specified accessories covered by your order.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different path length, body size, closure arrangement or another material for a related application, please send your drawing or holder details, critical dimensions, sample conditions and target quantity. You can discuss your requirements with us.