(MQQCM002) Standard 80 Quartz Colorimetric Cuvette, 10 mm Path, 13 mL

Weight	50 g

SKU: MQQCM002

Quartz Colorimetric Cuvette, 10 mm path, 13 mL nominal capacity, Colorimeter Sample Chamber

Product dimensions for checking holder clearance and sample access.

$191.00

In Stock

Standard 80 adhesive-bonded JGS1 quartz colorimetric cuvette for routine room-temperature aqueous samples and buffers. This open-top option has a 10 mm optical path, two opposing optical faces, 13 mL nominal capacity and a 31 × 14 × 62 mm body. One cell supplied.

In Stock

SKU: MQQCM002 Categories: Cuvettes, Products, Quartz Colorimetric Cuvettes Tags: 10 mm path length, Cuvettes, JGS-1 quartz cuvette

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQCM002 is a JGS1 quartz colorimetric cuvette with a 10 mm optical path, an open top and a 13 mL nominal capacity. It suits routine straight-through UV/Vis and colorimetric work when you want direct filling from above and a simple rectangular body without side fittings. The body-only dimensions of 31 × 14 × 62 mm also give you a clear basis for checking holder space and top access before ordering.

Path Length: 10 mm
Sample Volume (Nominal): 13 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Colorimetric Cuvette
Measurement Mode	Colorimetry; UV/Vis Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	13 mL
External Dimensions	31 × 14 × 62 mm
Cell Body Dimensions	31 × 14 × 62 mm
External Dimensions Scope	Body Only
Body Height	62 mm
Internal Dimensions	27 × 10 × 60 mm
Material	Quartz
Material Grade	JGS1
Fabrication Method	Standard 80
Opening Configuration	Open Top
Pack Quantity	1 Piece
Package Contents	1 × Quartz Colorimetric Cuvette

Choose this option

Choose MQQCM002 when your method uses a standard 10 mm transmission path and you prefer an open sample chamber for filling, rinsing and visual checking. The 13 mL nominal capacity makes it suitable for methods that use a full-height sample chamber rather than a micro-volume format. The stated 200–2500 nm range applies to this JGS1 quartz option. Select this Standard 80 bonded version for routine aqueous work at room temperature.

What makes this option different

10 mm optical path for standard straight-through transmission measurements.
Open-top chamber for direct pipetting, pouring and rinsing from above.
JGS1 quartz body with a stated 200–2500 nm range for UV/Vis and colorimetry.
31 × 14 × 62 mm body-only size for checking holder clearance separately from any closure or accessory.

Structure and dimensions

Using this cell

Fill the cell from the top and keep the sample level high enough to cover the beam during measurement. Remove bubbles before reading, and keep the same orientation for blank and sample if your method depends on comparative readings.

Handle the cell by non-optical surfaces where possible. After rinsing, make sure the outer optical faces are clean and dry before placing the cell in the holder.

First-use check

Inspect the optical faces and chamber for chips, residue or transit damage.
Run a suitable blank to check holder fit and beam alignment before sample measurements.
Confirm that your normal fill level covers the beam in your own setup.

Fit and optical alignment

View the English selection reference.

The stated external dimensions apply to the body only: 31 × 14 × 62 mm. Check your holder slot, insertion space and top clearance against that body size before ordering.

Z Height needs to be confirmed for this option, so beam-height-sensitive instrument fit should be checked against your holder drawing or an existing cell reference. The 13 mL figure is a nominal capacity, not a minimum working volume.

English selection reference — Selection reference ↗

Solvents and cleaning

This cell uses Standard 80 adhesive-bonded quartz construction. It is a practical choice for routine room-temperature aqueous samples and buffers. Avoid organic sample solvents and organic cleaning agents on this bonded assembly.

If your method uses organic solvents or heated treatment, ask about a more suitable Sintered or Molded alternative before ordering. Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning materials, and clean the optical faces gently with a non-abrasive water-based approach.

Included with this option

1 Quartz Colorimetric Cuvette.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes to dimensions, optical path length, sample volume, windows, Z Height, closure details and fabrication requirements. Send your holder drawing or current cell reference, together with sample conditions, quantity and delivery destination, through the contact page.