(MQQSC040) 5 mm Quartz Screw-Top Cuvettes, Four-Sided Optical Access, Pack of 2
$514.00
Pack of two quartz screw-top cuvettes, each with a 5 mm optical path and four-sided optical access. Removable screw closures provide direct top filling and keep the openings covered during routine handling. Molded 83 fabrication; accompanying closures supplied.
In Stock
Description
MQQSC040 is a quartz Screw-Top Cuvette for UV/Vis spectroscopy with a 5 mm optical path and four-sided optical access. Its capped top access makes it a practical choice when you want to fill through a removable closure rather than use an open-top cell, and the sale unit provides two cells in the same listed configuration. This option is sold as a pack of 2 with accompanying closures.
- Path Length
- 5 mm
- Cell Type
- Screw-Top Cuvette
- Closure Type
- Screw Cap
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 5 mm |
| Light Transmission Configuration | Four-Way Light |
| Material | Quartz |
| Closure Type | Screw Cap |
| Closure Included | Yes |
| Fabrication Method | Molded 83 |
| Sales Unit | pack of 2 |
| Package Contents | 2 × Quartz Screw-Top Cuvette; Accompanying closures |
Choose this option
Choose this cuvette when your method requires a 5 mm path length together with a four-sided optical access and screw-top handling. The threaded top supports direct filling, emptying and rinsing, while the covered opening is useful for routine handling after loading. The pack provides two cells of the stated configuration for separate preparation or comparison routines; it does not specify an optically matched pair.
What makes this option different
- 5 mm optical path for methods specified around a shorter transmission length.
- Four-sided optical access for setups that use side optical access in addition to the main transmission direction.
- Screw-cap closure for direct top access and covered sample handling.
- Pack of 2 with accompanying closures for the listed sale unit.
Using this cell
Fill the cell so the sample covers the illuminated region used by your instrument, then apply the closure for normal handling and measurement. Keep blank and sample in the same orientation, especially where the optical layout of the cell matters to your measurement geometry.
Before reading, remove visible bubbles and wipe the exterior optical faces clean. The closure covers the opening during routine use, but it should not be treated as a pressure-rated connection.
First-use check
- Inspect the optical faces, opening and closure area for chips, residue or contamination.
- Test the fit in your holder and run a blank in the same orientation you will use for samples.
- Confirm that your intended fill level covers the illuminated region without bubbles in the optical path.
Fit and optical alignment
View the English selection reference.
Check holder clearance for both the cell body and cap handling before ordering. Z Height is not established for this SKU, so if your instrument has a fixed beam position or limited holder geometry, verify fit against your current cell or send holder details for review.
Establish the working fill from the illuminated region in your fixture. A verified capacity is not available for this exact four-face option; send any fixed-volume or tight-clearance requirement for selection advice.
Solvents and cleaning
This cuvette uses Molded 83 fabrication. It is often selected for methods involving organic solvents or heated measurement conditions, but the exact chemical limits of this assembled SKU are not established for every liquid and closure-contact combination.
Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaning materials. If your method involves aggressive chemicals, prolonged contact or elevated temperature, check suitability for your exact conditions before ordering.
Included with this option
2 Quartz Screw-Top Cuvettes with accompanying closures. The listed price is for one pack of 2.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
If you need a different path length, body size, closure style or holder fit, send your drawing or a labelled sketch together with the dimensions that matter to your setup. It also helps to include instrument or holder details, the measurement mode, sample conditions and your required quantity.
Send a product-selection enquiry with SKU MQQSC040 and your application details.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.
You may also like…
Related products
14%
(MQC372) Quartz Capillary Tubes (Square), Outer Dim.: 1.4×1.4mm, Inner Dim.: 1.1×1.1mm, Length: 100mm
Original price was: $38.00.$33.00Current price is: $33.00.11%
(MQC378) Quartz Capillary Tubes (Square), Outer Dim.: 1x1mm, Inner Dim.: 0.3×0.3mm, Length: 25mm
Original price was: $19.00.$17.00Current price is: $17.00.15%
(MQC380) Quartz Capillary Tubes (Square), Outer Dim.: 1x1mm, Inner Dim.: 0.6×0.6mm, Length: 50mm
Original price was: $28.00.$24.00Current price is: $24.00.11%
Reviews
There are no reviews yet.