(MQQSC032) 5 mm Quartz Screw-Top Cuvettes, 1.75 mL Each, Pack of 2

Weight	50 g

SKU: MQQSC032

$514.00

In Stock

Pack of two JGS1 quartz cuvettes, each with a 5 mm optical path, 1.75 mL nominal capacity and four-sided optical access. An M10 screw top provides removable access for filling and rinsing; accompanying closures are included. Each optical body is 38 mm high and reaches 58 mm with its cap.

In Stock

SKU: MQQSC032 Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Tags: 5 mm path length, Cuvettes, Four-side light-transmitting, Quartz Cuvette

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQSC032 is a JGS1 quartz Screw-Top Cuvette for UV/Vis spectroscopy with a 5 mm optical path, four-sided optical access and a large M10 screw opening. This combination is useful when you want direct top access for filling and rinsing, while keeping optical access from multiple sides of the cell body. Each cell has a 1750 µL nominal capacity, and this listing is sold as a pack of 2 with accompanying closures.

Path Length: 5 mm
Sample Volume (Nominal): 1.75 mL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	5 mm
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.75 mL
Cell Body Dimensions	12.5 × 7.5 × 38 mm
Overall Height without Closure	54 mm
Body Height	38 mm
Overall Height with Closure	58 mm
Base Dimensions	12.5 × 7.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Closure Included	Yes
Port Thread	M10
Fabrication Method	Molded 83
Sales Unit	pack of 2
Package Contents	2 × Quartz Screw-Top Cuvette; Accompanying closures

Choose this option

Choose MQQSC032 when your method is written around a 5 mm path and you want a capped quartz cell with easier top access than a narrow opening. The M10 screw top helps with loading and covered handling, while the four-sided optical layout supports setups that use the main transmission direction and also benefit from side optical access.

What makes this option different

5 mm optical path for methods specified around this shorter transmission length.
Four-sided optical access gives optical access on four sides of the cuvette body.
Large M10 screw opening allows direct top filling, rinsing and cap removal.
Pack of 2 supplied with accompanying closures under one listed sale unit.

Using this cell

Fill each cuvette through the screw opening and seat the closure for your normal handling routine between preparation and measurement. Keep the same orientation for blank and sample readings, especially if your setup uses a chosen pair of faces for the main optical path.

The nominal capacity is 1750 µL per cell. Minimum working volume is not established here, so if your method depends on a low fill level, check that the liquid covers the illuminated region in your actual holder and beam position.

Remove visible bubbles before measurement and keep the exterior optical faces clean and dry. The screw cap is for covered sample handling; it is not presented here as a pressure-rated connection.

First-use check

Inspect both cells for clean optical faces and an undamaged sample chamber.
Place each cell in the holder and verify stable seating and beam alignment with a suitable blank.
After filling, remove bubbles and exterior droplets, then repeat the blank in the same orientation if needed.

Fit and optical alignment

View the English selection reference.

The base measures 12.5 × 7.5 mm. The optical body height is 38 mm, bare height including the neck is 54 mm, and overall height with cap is 58 mm. Check holder width, insertion depth and cap clearance before ordering, especially if your cell compartment is closely fitted above the cuvette position.

Z Height is not established for this SKU, so beam alignment should be checked from your instrument geometry rather than assumed from the total height. The M10 thread identifies the closure style, but it does not by itself define a sealed or pressure-tested assembly.

English selection reference — Selection reference ↗

Solvents and cleaning

Molded 83 is the listed fabrication for this cuvette. In MQ’s fabrication range, this type is commonly selected for methods that may involve organic solvents or heated conditions, but suitability still depends on the complete assembly, including the closure.

The exact chemical limits for this SKU are not established here. Keep hydrofluoric acid away from quartz, avoid hot strong alkalis and abrasive cleaners, and wipe the optical faces gently with a non-abrasive material suitable for laboratory optics.

Included with this option

2 Quartz Screw-Top Cuvettes and accompanying closures. The listed price is for the pack of 2.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different path length, external fit, opening style or optical layout, please send your holder details or a labelled sketch. MQ custom enquiries generally use JGS1 quartz, and prototype batches typically involve 2–4 cells, with final feasibility, specifications, quantity, price and production time confirmed in quotation.

Send a product-selection enquiry with SKU MQQSC032, your instrument or holder details, sample conditions and required quantity.