Site Navigation

(MQQSC047) Quartz Screw-Top Cuvette, 10 mm path, 50 mm Height with Cap, Pack of 2

Weight50 g
SKU: MQQSC047

$360.00

In Stock

Pack of two JGS1 quartz screw-top cuvettes, each with a 10 mm optical path, 3 mL nominal capacity and two opposing transmission faces. M10 top openings and accompanying PTFE caps support filling from above and covered handling; each cell is 46 mm high uncapped and 50 mm with its cap.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQSC047 is a JGS1 quartz screw-top cuvette for UV/Vis spectroscopy with a 10 mm optical path and 3 mL nominal capacity per cell. This option combines a Two-face transmission layout with an M10 threaded top opening and PTFE cap, giving you a covered sample cell while keeping filling and emptying straightforward. The listed sale unit is a pack of 2.

Path Length
10 mm
Sample Volume (Nominal)
3 mL
Opening Configuration
Screw-Top

Selection Specifications

Product KindCuvette
Cell TypeScrew-Top Cuvette
Measurement ModeUV/Vis Spectroscopy
Path Length10 mm
Light Transmission ConfigurationTwo-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)3 mL
External Dimensions12.5 × 12.5 × 32 mm
Body Height32 mm
Overall Height with Closure50 mm
Base Dimensions12.5 × 12.5 mm
MaterialQuartz
Material GradeJGS1
Closure TypeScrew Cap
Closure MaterialPTFE
Closure IncludedYes
Port ThreadM10
Fabrication MethodMolded 83
Opening ConfigurationScrew-Top
Sales Unitpack of 2
Package Contents2 × Quartz Screw-Top Cuvette; Accompanying closures

Choose this option

Choose MQQSC047 when you need a 10 mm quartz transmission cell with a screw-cap top rather than an open cuvette. The capped top is useful when your handling routine calls for loading from above and then covering the sample, and the pack of 2 provides two cells of the same specification for separate preparations or a spare.

What makes this option different

  • 10 mm optical path for methods set up around this standard transmission length.
  • Two-face transmission layout for measurements through two opposing optical faces.
  • M10 screw-top opening with PTFE cap for direct top access and covered handling.
  • Pack of 2 so the listed price covers two cuvettes with accompanying closures.

Structure and dimensions

MQQSC047 screw-top cuvettes and accompanying caps; the sales pack contains two cells.
MQQSC047 screw-top cuvettes and accompanying caps; the sales pack contains two cells.Open image ↗

Using this cell

Fill each cell through the top opening, then seat the cap before measurement if your procedure calls for a covered sample. Keep the same orientation for blank and sample runs, and make sure the liquid level covers the illuminated region used by your instrument.

Before measurement, remove visible bubbles and wipe the outside optical faces clean and dry. Handling the cell by the non-optical areas helps reduce fingerprints on the light path.

First-use check

  1. Inspect both cuvettes for clean optical faces, intact threads and proper cap fit.
  2. Place a cell in your holder and verify beam alignment with a suitable blank.
  3. Repeat blank and sample measurements in the same orientation.

Fit and optical alignment

View the English selection reference. Also available in the product gallery.

The base is 12.5 × 12.5 mm, the optical body height is 32 mm, the uncapped height including the neck is 46 mm, and the height with cap is 50 mm. If your holder, lid or upper clamp sits close to the top of the cuvette, allow space for the neck and cap as well as the square base.

Z Height is not established for this SKU, so beam-center compatibility should be checked against your instrument instead of assumed from the outer shape. The screw-cap top is a closure format, not a stated pressure-rated connection.

Solvents and cleaning

This option uses Molded 83 fabrication. This type is commonly chosen for methods that may involve organic solvents or heated conditions, but suitability still depends on the complete assembled cell, including the cap and any sealing contact points.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaners, and clean the optical faces gently with non-abrasive optical tissue or another suitable laboratory wipe.

Included with this option

2 Quartz Screw-Top Cuvettes and the accompanying closures. The listed price is for the pack of 2.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes involving dimensions, optical path length, sample volume, closures and fabrication details. If you need a different holder fit or top arrangement, send a labelled drawing or sketch and identify the critical dimensions, sample chemistry, quantity and target date.

Send a product-selection enquiry with SKU MQQSC047 and your application details.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQSC047) Quartz Screw-Top Cuvette, 10 mm path, 50 mm Height with Cap, Pack of 2”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare