(MQQMC038) Quartz Micro Cuvette, 10 mm path, Centered 5 mm Slit
Description
MQQMC038 is a JGS1 quartz micro cuvette for UV/Vis work with a 10 mm optical path, an open top and a centered 5 mm slit. Its Two-Way Light layout and 1.75 mL nominal volume make it a straightforward choice when you want direct access to the sample chamber in a compact square-body cell.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 1.75 mL
- Opening Configuration
- Open Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Micro Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 1.75 mL |
| External Dimensions | 12.5 × 12.5 × 45 mm |
| Cell Body Dimensions | 12.5 × 12.5 × 45 mm |
| External Dimensions Scope | Body Only |
| Body Height | 45 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Standard 80 |
| Opening Configuration | Open Top |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Micro Cuvette |
Choose this option
Choose MQQMC038 when your method uses a 10 mm path and you want direct filling from the top rather than a capped opening. The centered 5 mm slit defines the sample-region geometry, while the Two-Way Light layout keeps the transmission direction simple when your setup reads across the two main optical faces.
What makes this option different
- 10 mm optical path for UV/Vis measurement in a compact micro-cuvette body.
- Centered 5 mm slit for methods that need this specific sample-region geometry.
- Open-top design for direct pipetting, rinsing and visual access to the sample chamber.
- Two-Way Light layout with 1.75 mL nominal volume in a 12.5 × 12.5 × 45 mm body.
Structure and dimensions

Using this cell
Fill the sample chamber directly from the open top and keep the same orientation for blank and sample throughout the method. The slit orientation should remain consistent so the beam passes through the intended region each time.
The nominal volume is 1.75 mL, but the minimum working volume is not established for this SKU. Before measurement, confirm that your fill level covers the beam position in the holder and remove visible bubbles from the optical path.
First-use check
- Inspect the optical faces and open-top chamber for residue or handling marks.
- Check holder fit and beam alignment with a suitable blank in the measurement orientation.
- Confirm that the filled sample fully covers the beam path and that no bubbles remain in the sample region.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
The body dimensions are 12.5 × 12.5 × 45 mm. These dimensions apply to the body only, which is useful when checking holder slot size and vertical clearance around an open-top cell.
Z Height is not established for this SKU. If your instrument requires a defined beam-center height, please check that dimension before ordering rather than relying on body height alone.

Solvents and cleaning
This cuvette uses Standard 80 adhesive-bonded quartz construction. This type is generally chosen for room-temperature water-based samples and buffer solutions. If your method involves organic solvents, it is better to check suitability first or consider a more appropriate Sintered or Molded option for that chemistry.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis, abrasive cleaners and organic cleaning agents unless suitability for the complete assembly has been checked first. Clean the optical faces gently with non-abrasive optical tissue.
Included with this option
1 Quartz Micro Cuvette. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, openings, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application.
Prototype batches typically involve 2–4 cells; the final quantity, feasibility, specifications, price and production time are confirmed in the project quotation. Modified designs and prototype batches are quoted separately from the listed SKU. Send a product-selection enquiry with SKU MQQMC038, your holder details, sample conditions, quantity and destination.
Additional information
| Weight | 150 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.