Site Navigation

(MQQMC037) Quartz Standard Cuvette, 0.3 mm path, 105 µL nominal capacity, Very Short Sample Path

Weight300 g
SKU: MQQMC037

$365.00

In Stock

JGS1 quartz standard cuvette for UV/Vis work with a 0.3 mm optical path and 105 µL nominal capacity. Its open-top design gives direct access for pipette filling and inspection, and the listed price is for 1 piece supplied without a cap.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQMC037 is a JGS1 quartz standard cuvette for UV/Vis methods that use a very short 0.3 mm optical path. Its 105 µL nominal capacity and open-top format make it suitable for direct filling and visual checking from above, while the slim body helps when you need a narrow cell profile in the holder area. This option is sold as 1 piece and is supplied without a cap.

Path Length
0.3 mm
Sample Volume (Nominal)
105 µL
Opening Configuration
Open Top

Selection Specifications

Product KindCuvette
Cell TypeStandard Cuvette
Measurement ModeUV/Vis Spectroscopy
Path Length0.3 mm
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)105 µL
External Dimensions12.5 × 2.7 × 45 mm
External Dimensions ScopeBody Only
Body Height45 mm
MaterialQuartz
Material GradeJGS1
Closure TypeOpen Top
Closure IncludedNo
Fabrication MethodMolded 83
Opening ConfigurationOpen Top
Pack Quantity1 Piece
Package Contents1 × Quartz Standard Cuvette

Choose this option

Choose MQQMC037 when your method is written around a fixed 0.3 mm path in a standard cuvette body. The combination of short path length, small nominal capacity and open top suits routine top loading by pipette, with direct access to the sample area before measurement. It is also useful when holder clearance is limited and a slim body profile matters.

What makes this option different

  • 0.3 mm optical path for UV/Vis methods that require a very short fixed path length.
  • 105 µL nominal capacity in a compact sample region that supports small-volume loading.
  • Open-top access lets you fill, inspect and empty the cell directly from above.
  • JGS1 quartz body specified here for UV/Vis use over 200–2500 nm.
  • Molded 83 fabrication is a useful selection point when your sample or cleaning routine may involve organic-solvent methods, while final suitability still depends on the full chemical conditions.
  • 12.5 × 2.7 × 45 mm body-only dimensions provide a narrow external profile for holder and clearance checks.

Structure and dimensions

Product structure and the listed configuration.
Product structure and the listed configuration.Open image ↗

Using this cell

Fill the cell from the top and make sure the sample fully covers the illuminated region during measurement. Remove visible bubbles before reading, and keep the same orientation for blank and sample runs.

Because 105 µL is the nominal capacity, use it as the stated cell volume rather than as a minimum working fill level. Handle the cuvette by non-optical surfaces where possible, and keep the optical faces clean and dry.

First-use check

  1. Inspect the optical faces and inner sample area for dust, marks or chips.
  2. Seat the cell in the holder and confirm that the slim body sits securely without forcing.
  3. Run a blank in the intended orientation and verify that the filled sample covers the beam area.

Fit and optical alignment

The recorded external dimensions are 12.5 × 2.7 × 45 mm for the body only. Use these dimensions to check holder width, depth and vertical seating where space is tight.

View the English selection reference. Z Height is not listed for this SKU, so if your instrument depends on a specific beam-center height, check that requirement before ordering.

English selection reference
Selection reference ↗

Solvents and cleaning

Molded 83 is used for this cuvette. In MQ selection guidance, this fabrication is commonly chosen for organic-solvent and heated measurement methods, but the exact compatibility of this SKU is not established for all chemicals or cleaning routines.

Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaners. Clean the optical faces gently with non-abrasive optical tissue, and if your sample or cleaning process involves aggressive or prolonged chemical contact, check suitability before use.

Included with this option

1 Quartz Standard Cuvette, supplied without a cap.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes involving path length, external dimensions, sample volume, window layout, Z Height, closures and fabrication requirements. Send your drawing or holder details, sample conditions and required quantity for review.

Send a product-selection enquiry with SKU MQQMC037 and your application details.

Additional information

Weight300 g

Reviews

There are no reviews yet.

Be the first to review “(MQQMC037) Quartz Standard Cuvette, 0.3 mm path, 105 µL nominal capacity, Very Short Sample Path”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare