(MQQIR004) Quartz Standard Cuvette, 0.2 mm path, JGS3 Quartz
Description
MQQIR004 is a JGS3 quartz standard cuvette for infrared spectroscopy with a 0.2 mm optical path and Two-Way Light layout. The open-top body gives direct access to the sample region, and the slim 12.5 × 2.7 × 45 mm bare-body format helps when holder width or installation space is limited. This option is supplied without a closure and sold as 1 piece.
- Path Length
- 0.2 mm
- Cell Type
- Standard Cuvette
- Opening Configuration
- Open Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Standard Cuvette |
| Measurement Mode | Infrared Spectroscopy |
| Path Length | 0.2 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 260 nm |
| Wavelength Range — Upper Limit | 3500 nm |
| External Dimensions | 12.5 × 2.7 × 45 mm |
| Body Height | 45 mm |
| Base Dimensions | 12.5 × 2.7 mm |
| Material | Quartz |
| Material Grade | JGS3 |
| Closure Type | No Closure |
| Closure Included | No |
| Fabrication Method | Molded 83 |
| Opening Configuration | Open Top |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Standard Cuvette |
Choose this option
Choose MQQIR004 when your method needs a very short 0.2 mm path in a standard cuvette form and uses transmission through two opposing optical faces. The open, uncapped body suits work where direct filling, inspection and cleaning matter more than covered handling. This SKU uses JGS3 quartz for infrared spectroscopy across the stated 260–3500 nm range.
What makes this option different
- 0.2 mm optical path for short-path infrared measurement.
- Two-Way Light configuration for transmission through the main opposing optical faces.
- Open top with no closure for direct access to the sample region during filling and cleaning.
- JGS3 quartz specified for infrared spectroscopy across the stated 260–3500 nm range.
- Slim 12.5 × 2.7 × 45 mm bare body for holder and clearance checks where space is limited.
- Molded 83 fabrication with supplier-described optical-contact or integrated-forming construction.
Using this cell
Fill from the open top and make sure the sample fully covers the illuminated region before measurement. With a short path cell, bubbles, droplets and residue in the sample region can interfere with the reading, so check the filled area carefully before placing the cuvette in the holder.
Because this option has no closure, it is best suited to workflows where open access is acceptable during handling and measurement. Keep the same orientation for background and sample runs, and handle the cell by the non-optical surfaces where possible.
First-use check
Inspect the optical faces and sample region for chips, dust or residue before use. Test fit the bare cell in the holder, confirm that the beam passes through the intended opposing faces, and run a background in the same orientation you will use for the sample.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
The stated 12.5 × 2.7 × 45 mm dimensions apply to the bare body only. Use them to check holder slot size, insertion depth and top clearance, especially in compact IR compartments or accessories.
Z Height is not established for this SKU. If your setup depends on a defined beam-center height, confirm that requirement with your holder or current cell reference before ordering.

Solvents and cleaning
Molded 83 is the fabrication classification for this cuvette, and the source also describes optical-contact or integrated-forming construction. That combination is useful when you are selecting an IR cell around its current body style and open access, but it does not replace a chemical review for your actual sample and cleaning routine.
Chemical limits for this exact SKU are not established here. Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning materials, and wipe the exterior optical faces gently with non-abrasive optical tissue.
Included with this option
1 quartz standard cuvette and 1 storage box. No closure is included.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application. Prototype batches typically involve 2–4 cells; the final quantity, feasibility, specifications, price and production time are confirmed in the project quotation.
Send a product-selection enquiry with SKU MQQIR004, your holder details, sample conditions, quantity and delivery destination.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.









Reviews
There are no reviews yet.