(MQQSC041) JGS3 Quartz Screw-Top Cuvette, 0.2 mm Path, 70 µL
$948.00
MQQSC041 is a JGS3 quartz screw-top cuvette for infrared spectroscopy with a 0.2 mm optical path, Four-Way Light configuration and 70 µL nominal capacity. Its single threaded neck and included PTFE screw cap define the current format for top filling and covered handling. Sold as 1 piece with accompanying closure.
Description
MQQSC041 is a JGS3 quartz Screw-Top Cuvette for infrared spectroscopy with a 0.2 mm optical path and 70 µL nominal capacity. It combines a Four-Way Light layout with a single threaded neck and an included PTFE screw cap, giving you a short-path IR cell that is filled from the top and then closed for measurement. This format is useful when your method needs JGS3 quartz, a narrow optical body and a covered sample chamber in the same assembly.
- Path Length
- 0.2 mm
- Sample Volume (Nominal)
- 70 µL
- Opening Configuration
- Single Threaded Neck
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | Infrared Spectroscopy |
| Path Length | 0.2 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 260 nm |
| Wavelength Range — Upper Limit | 3500 nm |
| Sample Volume (Nominal) | 70 µL |
| External Dimensions | 12.5 × 2.7 × 35 mm |
| Body Height | 35 mm |
| Overall Height with Closure | 58 mm |
| Base Dimensions | 12.5 × 2.7 mm |
| Material | Quartz |
| Material Grade | JGS3 |
| Closure Type | Screw Cap |
| Closure Material | PTFE |
| Closure Included | Yes |
| Fabrication Method | Molded 83 |
| Opening Configuration | Single Threaded Neck |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Screw-Top Cuvette; Accompanying closure |
Choose this option
Choose MQQSC041 when your infrared method calls for a 0.2 mm path in a screw-cap quartz cell rather than an open-top chamber. The 70 µL nominal capacity matches this short-path format, and the PTFE cap is relevant when you need the listed closure material rather than an unspecified cap. The long, narrow body also makes the installation height worth checking together with holder support.
What makes this option different
- JGS3 quartz for infrared spectroscopy with a listed 260–3500 nm range.
- 0.2 mm optical path with 70 µL nominal capacity in a compact cell body.
- Four-Way Light configuration with a single threaded neck for top filling.
- PTFE screw cap included, with a 12.5 × 2.7 × 35 mm bare optical body and 58 mm overall height with cap.
Structure and dimensions

Using this cell
Fill the sample through the threaded neck and fit the PTFE screw cap for the intended measurement setup. Keep the orientation consistent between blank and sample measurements, and inspect the optical region for visible bubbles before reading.
The 70 µL figure is the nominal capacity of the cell. It does not establish the minimum working volume needed to cover your beam, so that should be checked in your own instrument arrangement.
First-use check
- Inspect the quartz body, neck, cap and optical faces for shipping damage or residue.
- Place the cell in the holder and confirm support and cap-removal clearance.
- Fill carefully, remove visible bubbles and verify beam coverage at your intended fill level.
Fit and optical alignment
The bare optical body is 12.5 × 2.7 × 35 mm. The overall height with cap is 58 mm, so holder support at the body and vertical clearance above the neck should be checked separately.
Z Height is not established for this SKU, so instrument fit should not be assumed from the outside dimensions alone. If your holder or beam position is fixed, review that requirement before ordering.
View the English selection reference.

Solvents and cleaning
This cuvette uses Molded 83 quartz construction. This fabrication type is often selected for methods involving organic solvents or heat, but the exact chemical limits of this assembled cell are not established here, so specific solvent, temperature and contact-time conditions should be checked for the full cell and closure where they matter.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning methods, and clean the optical faces gently with suitable non-abrasive tissue.
Included with this option
1 Quartz Screw-Top Cuvette and accompanying closure. Price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication. Send a dimensioned drawing or labelled sketch together with your beam position, wavelength range, sample chemistry and any critical tolerances.
Prototype batches typically involve 2–4 cells; feasibility, final specifications, quantity, price and production time are confirmed in the project quotation. Modified designs are quoted separately from the listed SKU.
Send a product-selection enquiry quoting MQQSC041, quantity and delivery destination.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.











Reviews
There are no reviews yet.