(MQQSC022) Quartz Screw-Top Cuvette, 1 mm path, 260 µL nominal capacity, Angled Screw Neck
$419.00
Quartz screw-top cuvette for UV/Vis work with a 1 mm optical path, Two-Way Light layout and an angled M6 threaded neck. Its 260 µL nominal capacity and slim 12.5 × 4.25 mm body suit installations that need a narrow rectangular optical section with top access through a threaded neck. Sold individually as 1 cuvette.
Description
MQQSC022 is a JGS1 quartz screw-top cuvette for UV/Vis measurements with a 1 mm optical path, Two-Way Light transmission and an angled single threaded neck. This layout is useful when you need a narrow rectangular optical body but do not want the opening directly above the centerline of the cell. The 260 µL nominal capacity and slim 12.5 × 4.25 mm body help when holder space is limited around the optical section.
- Path Length
- 1 mm
- Sample Volume (Nominal)
- 260 µL
- Opening Configuration
- Single Threaded Neck
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 1 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 260 µL |
| External Dimensions | 12.5 × 4.25 × 38 mm |
| Body Height | 38 mm |
| Base Dimensions | 12.5 × 4.25 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Screw Cap |
| Port Thread | M6 |
| Fabrication Method | Molded 83 |
| Opening Configuration | Single Threaded Neck |
| Closure Thread | M6 |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Screw-Top Cuvette |
Choose this option
Choose this option when your method uses a 1 mm path and your fixture is designed for a narrow rectangular cuvette body rather than a wider standard format. The angled M6 neck is the main selection feature here: it changes how you fill, close and access the cell above the optical body, so it should be checked against nearby clamps, covers and surrounding hardware.
What makes this option different
- 1 mm optical path for methods that require a short transmission distance.
- Two-Way Light configuration with two opposing optical faces for the measurement beam.
- Angled single threaded neck with M6 closure thread, affecting top access and handling position.
- Slim 12.5 × 4.25 mm body with 38 mm body height to the shoulder for compact holder layouts.
Using this cell
Fill and orient the cuvette so the 1 mm path is used consistently for both blank and sample measurements. Make sure the liquid fully covers the illuminated region, and remove visible bubbles before measurement.
Handle the cell by the non-optical surfaces where possible. Keep the two transmitting faces clean and free of dried residue, droplets and fingerprints, especially for work at lower UV wavelengths.
First-use check
- Inspect the optical faces and sample chamber for chips, residue or handling marks.
- Test holder fit and beam position with a suitable blank before running samples.
- Check that the angled neck area can be reached for filling and closure handling without disturbing the cuvette position.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
The optical body dimensions are 12.5 × 4.25 × 38 mm. Here, 38 mm is the body height to the shoulder, not a full assembled height with a cap, so check upper-neck clearance separately if your holder surrounds the top of the cell.
Z Height is not established for this SKU. If your spectrometer or holder depends on a specific beam-center height, verify that point before ordering rather than assuming fit from the body size alone.
The neck uses an M6 closure thread. If your setup requires a matching cap, confirm that it is included with your order.

Solvents and cleaning
Molded 83 is the fabrication used for this cuvette. This type is commonly chosen for organic-solvent methods, but the exact chemical limits for this SKU are not established here, so suitability should be checked for your actual sample and cleaning conditions when exposure is aggressive, heated or prolonged.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning materials. Clean the optical faces gently with suitable non-abrasive tissue and a compatible cleaning liquid.
Included with this option
1 Quartz Screw-Top Cuvette. The listed price is for one cell.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a product-selection enquiry with SKU MQQSC022, your holder or instrument details, sample conditions and required quantity.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.










Reviews
There are no reviews yet.