(MQQFC050) Quartz Rectangular Sample Cell, 40 mm Path, 64 mL, Open at Both Ends
Description
MQQFC050 is a JGS1 quartz rectangular sample cell for custom setups that need a 40 mm optical path in a shorter body format. Its Four-Way Light layout, 64 mL nominal capacity and open-at-both-ends chamber make it suitable when you want to control the holder, end support and sealing arrangement yourself.
This version is especially useful when the path length stays fixed but the available height around the chamber is more limited. The cell body is supplied without built-in closures or fluid connections, so the final sample-handling method is set by your own assembly.
- Path Length
- 40 mm
- Sample Volume (Nominal)
- 64 mL
- Opening Configuration
- Open at Both Ends
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Rectangular Sample Cell |
| Measurement Mode | Transmission Spectroscopy |
| Path Length | 40 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 64 mL |
| External Dimensions | 44 × 44 × 40 mm |
| Body Height | 40 mm |
| Base Dimensions | 44 × 44 mm |
| Internal Dimensions | 40 × 40 × 40 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Opening Configuration | Open at Both Ends |
| Pack Quantity | 1 Piece |
Choose this option
Choose MQQFC050 when you need a 40 mm path in a rectangular quartz body but want a shorter 40 mm chamber height than taller alternatives. It suits custom optical or liquid-handling fixtures where direct access through both ends matters and the surrounding hardware will define the final mounting and sealing details.
View the English selection reference. Also available in the product gallery. Group photographs illustrate other options in the series.
What makes this option different
- 40 mm optical path for methods designed around this stated path length.
- 40 mm body height for installations where vertical clearance is tighter around the chamber.
- Open at both ends so the end support, sealing and transfer method can be defined in your own hardware.
- Four-Way Light configuration for measurement layouts that use side access as well as the main transmission direction.
Structure and dimensions

Using this cell
Align the beam across the 40 mm path and keep the same orientation for blank and sample. Because both ends are open, liquid retention, filling and bubble removal need to be handled by the holder or end arrangement used in your setup.
The nominal volume is 64 mL for the chamber itself. It does not define a minimum working volume, and any partial-fill or recirculating condition should be established in the final assembled fixture.
First-use check
- Inspect the optical faces, end openings and support-contact areas before installation.
- Confirm that the holder supports the body without twisting or point loading.
- Run a blank and verify alignment, filling and bubble control before measurement.
Fit and optical alignment
Use the 44 × 44 mm outer footprint and 40 mm body height to check holder clearance. The internal 40 × 40 × 40 mm dimensions describe chamber space only, so they should not be treated as the size of the holder opening or sealing interface.
Z Height is not stated for this SKU. Instrument fit should therefore be checked from the actual beam position and holder geometry rather than assumed from the body dimensions alone. Support the cell evenly and avoid concentrated clamping pressure on the optical faces.

Solvents and cleaning
This cell is made from JGS1 quartz with a supplier-described powder-fused construction. For general fabrication background, see MQ Cuvette Fabrication Glossary.
Chemical limits for this exact working assembly are not established here, so solvent and cleaning choices should be reviewed for the complete mounted arrangement, including any seals or fittings added in use. Keep hydrofluoric acid away from quartz, avoid hot strong alkalis and abrasive cleaning methods, and clean the optical faces gently with non-abrasive optical tissue.
Included with this option
1 rectangular sample cell. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
If you need a different chamber height, end arrangement or holder fit, send your drawing or labelled sketch with the critical dimensions, path requirement, sample conditions and target quantity. Holder details, beam position information and the intended sealing method are especially useful for fit review.
Send a product-selection enquiry with SKU MQQFC050 and your application details.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.