Site Navigation

(MQQFC111) JGS1 Quartz Counting Flow Cell, 1 mm Path, 80 µL

Weight50 g
SKU: MQQFC111

$186.00

In Stock

JGS1 quartz counting flow cell with a 1 mm optical path and 80 µL nominal capacity in a 30 × 4 × 15 mm optical body. Two opposed tubes, sized at 1.5 mm OD / 1 mm ID, connect the small sample region to your flow circuit. Two opposing optical faces support transmission measurement. One cell supplied.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC111 is a compact JGS1 quartz counting flow cell for UV/Vis measurement with a fixed 1 mm optical path and 80 µL nominal capacity. It combines a small optical body with two opposed fluid tubes, so you can build it into an in-line sample path where direct tubing access matters as much as the optical path. This option suits setups that need a short-path quartz flow cell in a narrow body rather than an open-top cuvette.

Path Length
1 mm
Sample Volume (Nominal)
80 µL
Opening Configuration
Two Opposed Fluid Tubes

Selection Specifications

Product KindFlow Cell
Cell TypeCounting Flow Cell
Measurement ModeUV/Vis Spectroscopy
Path Length1 mm
Light Transmission ConfigurationTwo-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)80 µL
Cell Body Dimensions30 × 4 × 15 mm
Body Height15 mm
Base Dimensions30 × 4 mm
MaterialQuartz
Material GradeJGS1
Port Count2
Tube Outer Diameter (OD)1.5 mm
Tube Inner Diameter (ID)1 mm
Fabrication MethodStandard 80
Opening ConfigurationTwo Opposed Fluid Tubes
Port LayoutEnd/side connection at the left in the referenced original; Opposite end/side connection at the right in the referenced original
Pack Quantity1 Piece
Package Contents1 × Quartz Counting Flow Cell

Choose this option

Choose MQQFC111 when your method is built around a 1 mm transmission path and a small in-line sample region, and when your tubing layout is matched to the stated 1.5 mm OD / 1 mm ID tube connections. The opposed end connections support straight-through plumbing around the cell body, while the 80 µL nominal capacity gives you a defined chamber size for sample-line planning without changing to a larger cuvette format.

What makes this option different

  • 1 mm optical path for methods that require a short fixed transmission length in a flow-cell format.
  • 80 µL nominal capacity in a compact counting-cell body for small-volume in-line sample handling.
  • Two-Way Light configuration for straight-through optical measurement across the defined path.
  • Two opposed fluid tubes for direct connection on opposite sides of the body rather than top filling.
  • 1.5 mm tube outer diameter and 1 mm inner diameter to help you match tubing and fittings on the fluid side.
  • Adhesive-bonded quartz construction in a Standard 80 selection suited to routine room-temperature aqueous and buffer use.

Using this cell

Connect the cell as an in-line component with the tube route supported independently from the quartz body. The projecting tubes are connection points, not lifting or alignment handles, so avoid using them to carry the weight of the assembled line.

Fill and flush the sample path gradually so the optical region is fully covered before measurement, and clear visible bubbles before taking a reading. The 80 µL figure is a nominal cell volume, not a stated minimum working volume, so your method should provide enough fill under your own flow conditions to keep the beam area consistently covered.

First-use check

  1. Inspect the optical faces and tube ends for chips, residue or transit contamination.
  2. Install the cell with the body supported, then run a blank to confirm clean filling through the optical path.
  3. Check holder clearance, beam position and tubing clearance in the final installed orientation.

Fit and optical alignment

View the English selection reference.

The stated 30 × 4 × 15 mm dimensions apply to the optical body only, excluding the projecting tubes. Leave additional space for the tube extensions, tubing bend radius and any external fittings when planning the installed envelope.

Z Height is not stated for this SKU, so beam-center fit should be checked against your holder or instrument before ordering. Body height does not establish beam height.

Gallery series photographs illustrate the shared cell format. The ordered path length and nominal capacity are the values stated for MQQFC111.

English selection reference
Selection reference ↗

Solvents and cleaning

Standard 80 here uses an adhesive-bonded quartz construction. It is suited to routine room-temperature aqueous samples and buffers. Avoid organic samples and organic cleaning solvents with this bonded assembly. If your method involves organic solvents or heated treatment, ask about a more suitable alternative before ordering.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning. Clean the optical faces gently with non-abrasive optical tissue.

Included with this option

1 Quartz Counting Flow Cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical layout and tube connections. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application. Prototype batches typically involve 2–4 cells; final feasibility, specifications, price and production time are confirmed in the project quotation. Send a product-selection enquiry with SKU MQQFC111, your holder details, sample conditions and target quantity.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC111) JGS1 Quartz Counting Flow Cell, 1 mm Path, 80 µL”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare