Site Navigation

(MQQFC125) Quartz Counting Flow Cell, 0.25 mm path, Dual-Channel Layout

Weight80 g
SKU: MQQFC125

$479.00

In Stock

MQQFC125 is a JGS1 quartz counting flow cell with a 0.25 mm optical path and two separate channel positions in one plate-style body. Four tube connections, one at each end of each channel as shown, help you route two flow paths within the same assembly. Sold as 1 piece. Standard 80.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC125 is a JGS1 quartz counting flow cell with a 0.25 mm optical path, two channel positions and four tube connections. Its flat 60 × 40 × 3.85 mm body gives you a compact plate-style format for fixtures that need a thin optical cell, while the dual-channel layout lets you plan two separate flow paths within one quartz assembly.

Path Length
0.25 mm
Cell Type
Counting Flow Cell
Opening Configuration
Two Channels with Four Tube Connections

Selection Specifications

Product KindFlow Cell
Cell TypeCounting Flow Cell
Measurement ModeFlow Counting
Path Length0.25 mm
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
External Dimensions60 × 3.85 × 40 mm
Cell Body Dimensions60 × 3.85 × 40 mm
Body Height40 mm
Base Dimensions60 × 3.85 mm
MaterialQuartz
Material GradeJGS1
Port Count4
Tube Outer Diameter (OD)1.5 mm
Tube Inner Diameter (ID)1 mm
Fabrication MethodStandard 80
Opening ConfigurationTwo Channels with Four Tube Connections
Port LayoutUpper channel, left end tube as drawn; Upper channel, right end tube as drawn; Lower channel, left end tube as drawn; Lower channel, right end tube as drawn
Pack Quantity1 Piece
Package Contents1 × Quartz Counting Flow Cell

Choose this option

Choose MQQFC125 when your setup needs a short 0.25 mm flow path and two distinct channel positions rather than one single passage. This layout is useful when you want both channels in the same mounting area and need to organise tubing access at both ends of each channel without moving to a larger multi-part arrangement.

What makes this option different

  • Two channel positions in one body: useful when your fixture or optical area is planned around a single plate-style cell.
  • Four tube connections: one connection at each end of each channel as drawn, for separate routing of the two channels.
  • 0.25 mm optical path: suited to methods that require a very short path through the flowing sample.
  • Thin body format: the bare body is 60 × 40 × 3.85 mm, with tube projections outside that body size.

Using this cell

Install and support the cell by the quartz body rather than by the projecting tubes. When both channels are used, keep the orientation consistent so your tubing layout and optical direction stay the same from blank to sample and between repeated runs.

Fill each channel slowly and check the illuminated region for trapped bubbles before measurement. No pressure rating is stated for this cell, so pressurised use should be reviewed against your own circuit conditions before installation.

First-use check

  1. Inspect the optical faces and tube openings for residue, chips or transport damage.
  2. Test holder seating and tubing clearance before introducing sample.
  3. Fill with a suitable blank, remove visible bubbles and confirm stable positioning in the optical path.

Fit and optical alignment

View the English selection reference.

The stated 60 × 40 × 3.85 mm dimensions apply to the bare body only. Leave additional space for the four tube projections, tubing bend radius and access at both left and right ends of the cell.

Each marked channel area is identified as 40 × 10 × 0.25 mm in the source drawing, which is useful for layout planning. Z Height is not established for this model, so beam position should be checked against your holder and optical system before ordering for a fixed-alignment instrument.

English selection reference
Selection reference ↗

Solvents and cleaning

This cell uses Standard 80 adhesive-bonded quartz construction. It is commonly chosen for routine room-temperature aqueous samples and buffers. Avoid organic samples and organic cleaning solvents with this bonded assembly. If your method involves organic solvents or heated treatment, ask about a more suitable Sintered or Molded alternative.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning methods, and wipe the exterior optical faces gently with non-abrasive optical tissue.

Included with this option

1 Quartz Counting Flow Cell. The listed price is for one piece.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz projects for requirements involving dimensions, optical path length, sample region, connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch together with holder details, sample conditions and quantity through our contact page, and refer to SKU MQQFC125.

Additional information

Weight80 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC125) Quartz Counting Flow Cell, 0.25 mm path, Dual-Channel Layout”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare