Site Navigation

(MQQSC054) Quartz Screw-Top Cuvette, 10 mm Path, 30 mm Height with Cap, 1.2 mL

Weight50 g
SKU: MQQSC054

$161.00

In Stock

JGS1 quartz screw-top cuvette for UV/Vis work with a 10 mm optical path, Two-Way Light layout and 1.2 mL nominal capacity. Its 12.5 × 12.5 mm body and 30 mm overall height with cap help when you need a closed top format in a compact footprint. Sold as 1 piece, with screw cap included.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQSC054 is a JGS1 quartz Screw-Top Cuvette for UV/Vis measurements with a 10 mm optical path. It combines a 1.2 mL nominal capacity with a compact 12.5 × 12.5 mm body and a threaded top closure, which is useful when you want top access for filling but need to keep the installed cell format short. This option is listed for the 200–2500 nm range.

View the English selection reference.

Path Length
10 mm
Sample Volume (Nominal)
1.2 mL
Closure Type
Screw Cap

Selection Specifications

Product KindCuvette
Cell TypeScrew-Top Cuvette
Measurement ModeUV/Vis Spectroscopy
Path Length10 mm
Light Transmission ConfigurationTwo-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)1.2 mL
Cell Body Dimensions12.5 × 12.5 × 20 mm
Overall Height without Closure20 mm
Body Height20 mm
Overall Height with Closure30 mm
Base Dimensions12.5 × 12.5 mm
MaterialQuartz
Material GradeJGS1
Closure TypeScrew Cap
Closure IncludedYes
Fabrication MethodMolded 83
Pack Quantity1 Piece

Choose this option

Choose MQQSC054 when your method uses a 10 mm path and you want a capped cell rather than an open-top chamber. The screw cap gives direct access from above for filling and emptying, while the 1.2 mL nominal capacity and compact square body make this option easier to place where holder space and top clearance both matter.

What makes this option different

  • Screw-cap top access lets you fill and empty the cell from above, then close it for routine handling and measurement.
  • 10 mm optical path suits UV/Vis methods built around this common path length.
  • Two-Way Light layout supports transmission along the stated optical path without adding side-access claims.
  • 1.2 mL nominal capacity keeps the sample region compact in a closed-cell format.
  • 12.5 × 12.5 mm body footprint helps with holder fit checks where lateral space is limited.
  • 20 mm body height and 30 mm overall height with cap let you assess holder seating and top clearance separately.
  • Integrated-forming construction with Molded 83 glossary mapping is a useful selection point for methods that may involve organic solvents, while the limits of the complete capped assembly still need to match your actual chemicals and conditions.

Using this cell

Fill the cell from the top and make sure the sample fully covers the beam path before measurement. After filling, fit the screw cap and keep the same cell orientation for blank and sample readings.

The 1.2 mL value is a nominal capacity, not a minimum working volume. Before reading, check the optical path for bubbles or an incomplete liquid column, and wipe the outside optical faces dry.

First-use check

  1. Inspect the optical faces, rim and threaded opening before the first fill.
  2. Place the empty cell in the holder to confirm seating and cap clearance.
  3. Fill with a suitable blank to check beam coverage, bubbles and exterior droplets.

Fit and optical alignment

The body footprint is 12.5 × 12.5 mm and the uncapped body height is 20 mm. With the cap fitted, the overall height is 30 mm, so top clearance should be checked with the cap in place rather than from the body size alone.

Z Height is not established for this SKU. If your instrument has a fixed beam position, the outer dimensions and 10 mm path length do not by themselves confirm beam alignment.

English selection reference
Selection reference ↗

Solvents and cleaning

This cuvette uses JGS1 quartz with source-listed integrated-forming construction and Molded 83 glossary mapping. That fabrication category is commonly selected for methods that may involve organic solvents, but the chemical limits of this exact capped assembly are not established here and should match your actual sample and cleaning conditions.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning methods, and clean the optical faces gently with non-abrasive materials intended for laboratory optics.

Included with this option

1 cuvette, with screw cap included. The listed price is for 1 piece.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different path length, body format, closure arrangement or another fit-related change, we can review a custom JGS1 quartz version. Send your holder details, beam position, sample conditions and quantity request through this contact page.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQSC054) Quartz Screw-Top Cuvette, 10 mm Path, 30 mm Height with Cap, 1.2 mL”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare