(MQQSC020) Quartz Screw-Top Cuvette, 1 mm path, 350 µL nominal capacity, JGS3 Short-Path Cell
$773.00
MQQSC020 is a JGS3 quartz screw-top cuvette for infrared spectroscopy with a 1 mm optical path, Four-Way Light layout and 350 µL nominal capacity. The short path and included PTFE screw cap suit enclosed sample handling in a compact cell with optical access from four sides. Sold as 1 piece with accompanying closure.
Description
MQQSC020 is a JGS3 quartz screw-top cuvette for infrared spectroscopy with a 1 mm optical path, Four-Way Light layout and 350 µL nominal capacity. It suits short-path liquid measurements where you want to fill from the top, close the cell with a screw cap and still keep optical access on four sides of the body.
- Path Length
- 1 mm
- Sample Volume (Nominal)
- 350 µL
- Closure Type
- Screw Cap
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | Infrared Spectroscopy |
| Path Length | 1 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 260 nm |
| Wavelength Range — Upper Limit | 3500 nm |
| Sample Volume (Nominal) | 350 µL |
| Body Height | 35 mm |
| Overall Height with Closure | 58 mm |
| Base Dimensions | 12.5 × 3.5 mm |
| Material | Quartz |
| Material Grade | JGS3 |
| Closure Type | Screw Cap |
| Closure Material | PTFE |
| Closure Included | Yes |
| Fabrication Method | Molded 83 |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Screw-Top Cuvette; Accompanying closure |
Choose this option
Choose MQQSC020 when your method needs a 1 mm path in a capped quartz cell rather than an open-top format. This option is useful when you want a short optical path, controlled top filling and a compact body that still gives optical access from multiple sides for the selected measurement direction.
What makes this option different
- 1 mm optical path for short-path infrared measurements.
- Four-Way Light configuration with optical access from four sides of the cuvette body.
- 350 µL nominal capacity in a narrow screw-top format.
- PTFE screw cap included with the listed single-piece sale unit.
- Compact base profile of 12.5 × 3.5 mm for holder-fit planning.
Using this cell
Fill the cell through the screw-top opening and seat the cap before measurement. Keep blank and sample in the same orientation so the same optical direction is used throughout the method.
The 350 µL figure is a nominal capacity, not a minimum working volume. Fill to cover the illuminated region in your own setup, and check carefully for trapped bubbles, especially with a short optical path.
First-use check
- Inspect the optical faces and screw-top opening for chips, residue or fingerprints.
- Test fit the cell in the holder and confirm that the intended optical faces align with the beam.
- Run a blank after filling and capping the cell in the same orientation planned for the sample.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
The base dimensions are 12.5 × 3.5 mm, the body height is 35 mm, and the overall height with cap is 58 mm. Check holder width, insertion depth and top clearance before ordering if your instrument has a tight compartment or lid clearance near the cap.
View the English dimensional reference. The reference is also available in the product gallery. Z Height is not established for this SKU, so beam-center fit should be checked against your holder or instrument requirement when that dimension is critical.

Solvents and cleaning
This cuvette uses Molded 83 fabrication, a construction often chosen for quartz cuvette work involving organic-solvent methods or elevated-temperature applications. The exact chemical limits of this assembled SKU are not established here, so aggressive reagents, heated liquids and long contact times should be checked for the complete assembly, including the PTFE closure.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the optical faces gently with suitable non-abrasive optical tissue or wipes.
Included with this option
1 Quartz Screw-Top Cuvette and accompanying closure. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication details. Send your holder information, a labelled sketch or drawing, the required optical direction, sample conditions and target quantity for review.
Send a product-selection enquiry with SKU MQQSC020 and your application details.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.











Reviews
There are no reviews yet.