Site Navigation

(MQQSC011) Quartz Screw-Top Cuvette, 3 mm path, Large Screw Opening

Weight100 g
SKU: MQQSC011

$359.00

In Stock

Quartz Screw-Top Cuvette MQQSC011 combines a 3 mm optical path with Four-Way Light geometry and a large M10 screw opening. Made from JGS1 quartz, it offers 1050 µL nominal capacity and a stated 200–2500 nm wavelength range for UV/Vis work with side optical access. The listed sale unit is 1 piece.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQSC011 is a JGS1 quartz Screw-Top Cuvette with a 3 mm optical path, Four-Way Light configuration and a large M10 screw opening. It suits UV/Vis work that needs a short path together with optical access from more than two sides of the sample region. This cell has a 1050 µL nominal capacity, a stated 200–2500 nm wavelength range, and is sold as one piece with an accompanying closure.

Path Length
3 mm
Sample Volume (Nominal)
1.05 mL
Closure Type
Screw Cap

Selection Specifications

Product KindCuvette
Cell TypeScrew-Top Cuvette
Measurement ModeUV/Vis Spectroscopy
Path Length3 mm
Light Transmission ConfigurationFour-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)1.05 mL
Cell Body Dimensions12.5 × 5.5 × 38 mm
Overall Height without Closure54 mm
Body Height38 mm
Overall Height with Closure58 mm
Base Dimensions12.5 × 5.5 mm
MaterialQuartz
Material GradeJGS1
Closure TypeScrew Cap
Closure IncludedYes
Fabrication MethodMolded 0.01
Closure ThreadM10
Pack Quantity1 Piece
Package Contents1 × Quartz Screw-Top Cuvette; Accompanying closure

Choose this option

Choose MQQSC011 when your setup needs a 3 mm path and also benefits from side optical access around the cell body. The screw-top opening keeps filling simple, while the Four-Way Light layout gives you more flexibility in how the sample region is accessed optically. This version is also listed under Molded 0.01 fabrication, which is commonly selected where tighter path-length requirements matter.

What makes this option different

  • 3 mm optical path for UV/Vis methods built around a short path length.
  • Four-Way Light configuration for optical access on more than two faces of the cell.
  • JGS1 quartz with stated 200–2500 nm range for UV/Vis use within that stated range.
  • M10 screw opening with closure included in a single-cell sale unit.

Structure and dimensions

Product structure and the listed configuration.
Product structure and the listed configuration.Open image ↗

Using this cell

Fill the cell through the screw opening so the sample covers the illuminated region, then fit the closure before measurement. Keep the same orientation for blank and sample runs, especially if your method uses a specific viewing direction through the available optical faces.

The 1050 µL figure is a nominal capacity, not a minimum working volume. The closure is supplied for covered sample handling, but the thread is not a pressure specification. If your method depends on seals, fittings or aggressive liquid contact, review the complete assembled cell and closure conditions.

First-use check

  1. Inspect the optical faces, screw opening and cap seating area before first use.
  2. Check holder fit and run a blank to confirm beam alignment.
  3. After filling, remove bubbles and wipe the exterior optical faces clean before measurement.

Fit and optical alignment

View the English selection reference. The available dimensions for this option include a 12.5 × 5.5 mm base, 38 mm body height and 58 mm overall height with cap.

Allow clearance for the neck and cap above the holder. Z Height is not established for this SKU, so instruments with a fixed beam center or tight holder geometry should be checked against the actual beam position and insertion depth before ordering.

English selection reference
Selection reference ↗

Solvents and cleaning

This cell is listed under Molded 0.01. This fabrication type is commonly selected where tighter path-length requirements matter. Chemical limits for this exact assembled SKU are not established here, so sample compatibility and cleaning suitability should be checked for the full cell and closure assembly.

Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaners, and clean the exterior optical faces gently with non-abrasive optical tissue.

Included with this option

1 Quartz Screw-Top Cuvette with accompanying closure. The listed price is for one cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application.

Prototype batches typically involve 2–4 cells; final feasibility, specifications, quantity, price and production time are confirmed in the project quotation. Send a product-selection enquiry with SKU MQQSC011, your holder details, sample conditions and required quantity.

Additional information

Weight100 g

Reviews

There are no reviews yet.

Be the first to review “(MQQSC011) Quartz Screw-Top Cuvette, 3 mm path, Large Screw Opening”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare