(MQQMC008) Quartz Micro Cuvette, 30 mm path, 5 mm Slit with Side Pin
Description
MQQMC008 is a JGS1 quartz micro cuvette for UV/Vis spectroscopy with a 30 mm optical path, Two-Way Light geometry and 5 mL nominal capacity. Its open-top chamber, compact 32.5 × 12.5 mm footprint and side-pin format make it a practical choice when you need a longer path length in a small body and want direct access for filling, rinsing and visual inspection.
- Path Length
- 30 mm
- Sample Volume (Nominal)
- 5 mL
- Opening Configuration
- Open Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Micro Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 30 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 5 mL |
| External Dimensions | 32.5 × 12.5 × 45 mm |
| Cell Body Dimensions | 12.5 × 32.5 × 45 mm |
| Body Height | 45 mm |
| Base Dimensions | 32.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Standard 80 |
| Opening Configuration | Open Top |
| Pack Quantity | 1 Piece |
| Bottom Thickness | 4 mm |
| Package Contents | 1 × Quartz Micro Cuvette |
Choose this option
Choose this cell when your method needs a 30 mm path in a micro cuvette body rather than a standard 10 mm format. The open top is useful for direct pipetting and cleaning, and the Two-Way Light layout suits measurements taken across one defined optical direction in UV/Vis work.
What makes this option different
- 30 mm optical path in a compact micro cuvette body for UV/Vis measurements.
- Open-top chamber for direct filling, emptying and visual inspection without an integrated closure.
- 5 mL nominal capacity with Two-Way Light geometry for one defined transmission direction.
- 32.5 × 12.5 mm base and 45 mm body height for holder clearance planning, with a side-pin body style.
Structure and dimensions

Using this cell
Fill from the top and keep the same orientation for blank and sample. Before measurement, check that the liquid fully covers the illuminated region and remove any bubbles from the optical path.
The 5 mL figure is the nominal capacity, not a minimum working volume. If your instrument uses a low beam height or a narrow beam, confirm coverage in your own holder before routine use.
First-use check
- Inspect the optical faces and top opening for chips, residue or handling marks.
- Test the fit in your holder before preparing a full sample.
- Run a blank in the intended orientation and confirm clean beam passage through the measurement region.
Fit and optical alignment
Use the external body dimensions for fit planning: 32.5 × 12.5 mm at the base and 45 mm body height. Leave access above the open top for filling and cleaning, and make sure your holder accommodates the actual body shape used by this cell.
The bottom thickness is 4 mm. That dimension describes the base section only and should not be used as a Z Height value. Z Height is not stated for this model, so beam-center matching should be checked from your holder and instrument geometry rather than inferred from overall height.
View the English selection reference.

Solvents and cleaning
This cell uses Standard 80 adhesive-bonded quartz construction. It is typically chosen for room-temperature water-based samples and buffer solutions.
Avoid organic samples and organic cleaning solvents with this bonded assembly. Do not use hydrofluoric acid with quartz, and avoid hot strong alkalis and abrasive cleaning methods. If your sample or cleaning routine involves organic solvents, aggressive chemicals, elevated temperature or extended contact time, please check the exact assembly requirements before ordering.
Included with this option
1 Quartz Micro Cuvette.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
If you need a different path length, body size, sample volume, optical layout or fabrication approach, send your drawing or holder details together with the critical dimensions, beam position, sample conditions and required quantity.
Custom enquiries generally use JGS1 quartz, with prototype batches typically involving 2–4 cells. Feasibility, final specifications, quantity, price and production time are confirmed in the project quotation. Contact us about a custom version.
Additional information
| Weight | 75 g |
|---|
You must be logged in to post a review.









Reviews
There are no reviews yet.