(MQQMC001) Quartz Micro Cuvette, 10 mm path, 1.4 mL nominal capacity, 4 mm Sample Slit
$90.00
MQQMC001 is a Standard 80 adhesive-bonded quartz micro cuvette with a 10 mm optical path, 1.4 mL nominal capacity and a 4 mm sample slit. Its stoppered top covers the chamber after filling. For room-temperature water-based samples and buffers; sold as one cell with its accompanying closure.
Description
MQQMC001 is a quartz Micro Cuvette for UV/Vis spectroscopy with a 10 mm optical path, a stoppered top and a 1.4 mL nominal capacity. Its straight-through Two-Way Light layout suits methods that need the familiar 10 mm measurement direction, with the 4 mm sample slit identifying the narrow sample-region format.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 1.4 mL
- Closure Type
- Stopper
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Micro Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Two-Way Light |
| Sample Volume (Nominal) | 1.4 mL |
| Material | Quartz |
| Closure Type | Stopper |
| Closure Included | Yes |
| Fabrication Method | Standard 80 |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Micro Cuvette; Accompanying closure |
Choose this option
Choose MQQMC001 when you want a covered micro cell rather than an open-top format and your method uses a 10 mm optical path. The removable stopper lets you cover the chamber after filling. Standard 80 adhesive-bonded construction makes this the option for room-temperature water-based samples and buffers; organic samples and organic cleaning solvents should be avoided.
What makes this option different
- 10 mm optical path for standard straight-through UV/Vis measurements.
- Stoppered top for a covered sample chamber, with the closure included.
- 4 mm sample slit distinguishes the sample-region geometry from the 10 mm measurement path.
- 1.4 mL nominal capacity in a compact micro-cuvette format.
Structure and dimensions

Using this cell
Fill the cell through the top opening, then seat the stopper gently for measurement. The stopper covers the chamber; it does not establish a pressure or leak-tightness rating. Keep the same orientation for blank and sample so the beam always passes through the intended optical faces.
Before reading, make sure the liquid level covers the beam path used by your instrument. The 1.4 mL nominal capacity describes the cell volume, but it does not define a minimum working volume for your setup.
First-use check
- Inspect the optical faces and sample chamber for chips, residue or visible contamination.
- Check that the stopper seats properly and that the cell sits correctly in the holder.
- Run a blank in the intended orientation and confirm that the filled sample covers the beam path.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
The 4 mm figure is the specified sample slit, not the optical path, a pipette-opening diameter or a guaranteed clear optical aperture. Check beam access and holder seating separately. Z Height is not specified, so a fixed beam-center requirement needs a separate fit check.

Solvents and cleaning
Avoid organic samples and organic cleaning solvents with this adhesive-bonded cell.
This cell uses Standard 80 adhesive-bonded quartz construction. It is generally suited to room-temperature water-based samples and buffer solutions.
Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the optical faces gently with suitable non-abrasive lab tissue or other non-scratching materials.
Included with this option
1 Quartz Micro Cuvette and the accompanying closure. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication details. Send a labelled drawing or sketch together with your holder information, critical dimensions, sample conditions and target quantity.
Prototype batches typically involve 2–4 cells; feasibility, final specifications, price and production time are confirmed in the project quotation. Send a product-selection enquiry with SKU MQQMC001 if you need a modified version.
Additional information
| Weight | 70 g |
|---|
You must be logged in to post a review.







Reviews
There are no reviews yet.