Site Navigation

(MQQFL002) Glass Fluorescence Cuvette, 21 mm path, 46 mL nominal capacity, Locating Blocks, Pack of 2

Weight100 g
SKU: MQQFL002

$450.00

In Stock

Glass fluorescence cuvette with a 21 mm optical path, Four-Way Light access and a 46 mL nominal capacity. The open-top locating-block body suits visible-light fluorescence work where repeatable holder seating is important. The listed price is for a pack of 2 cuvettes.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFL002 is a glass fluorescence cuvette for visible-light measurements, with a 21 mm optical path, Four-Way Light access and a 46 mL nominal capacity. The open-top body gives direct access for filling and rinsing, and the locating-block format helps you return the cell to a consistent position in a compatible holder. Supplied as a pack of 2 cuvettes.

Path Length
21 mm
Sample Volume (Nominal)
46 mL
Opening Configuration
Open Top

Selection Specifications

Product KindCuvette
Cell TypeFluorescence Cuvette
Measurement ModeFluorescence Spectroscopy; Visible Spectroscopy
Path Length21 mm
Light Transmission ConfigurationFour-Way Light
Wavelength Range — Lower Limit350 nm
Wavelength Range — Upper Limit800 nm
Sample Volume (Nominal)46 mL
External Dimensions50 × 25 × 72 mm
External Dimensions ScopeBody Only
Body Height72 mm
MaterialGlass
Fabrication MethodStandard 80
Opening ConfigurationOpen Top
Sales Unitpack of 2
Package Contents2 × Glass Fluorescence Cuvette

Choose this option

Choose this option when your method needs a 21 mm path and a larger open-top sample chamber, and when your holder or fixture benefits from a locating feature rather than a plain straight-sided body. The pack of 2 is practical for users who want a spare cell, parallel routine use or a dedicated blank and sample cell in the same format.

What makes this option different

  • 21 mm optical path for methods built around this longer transmission distance.
  • Four-Way Light configuration for optical access on four sides around the sample region.
  • Locating-block body to help the cuvette seat repeatably in a compatible holder.
  • Pack of 2 when you need two matching sale units of the same listed specification.

Using this cell

Fill from the open top and keep the orientation consistent between blank and sample measurements. In fluorescence work, use the same face alignment each time so the excitation and observation directions remain unchanged from run to run.

Make sure the liquid level covers the optical region used by your instrument, then remove bubbles and wipe the exterior faces clean before measurement. The 46 mL value is the nominal capacity of each cuvette, not a stated minimum working volume.

First-use check

  1. Inspect both cuvettes for clean optical faces and an undamaged top opening.
  2. Place each cell in the holder and confirm that it seats the same way each time.
  3. Run a blank in the intended orientation before routine use.

Fit and optical alignment

View the English selection reference.

The stated 50 × 25 × 72 mm dimensions apply to the body only. Check holder clearance, the way the locating blocks seat in your fixture and the available top access for filling before ordering.

Z Height is not established for this SKU. If your instrument uses a fixed beam-center height, check that point against your current cell or holder drawing rather than assuming fit from the path length alone.

English selection reference
Selection reference ↗

Solvents and cleaning

This adhesive-bonded glass cuvette is listed as Standard 80. This construction is commonly selected for room-temperature water-based samples and buffer solutions. If your method uses organic solvents, aggressive reagents, heated cleaning or long soaking, please check suitability before use because a chemical-compatibility range is not established for this option.

Keep hydrofluoric acid away from glass. Avoid hot strong alkalis and abrasive cleaners, and clean the optical faces gently with non-abrasive optical tissue.

Included with this option

2 glass fluorescence cuvettes. The listed price is for the pack of 2.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

For a different path length, body size or holder fit, please send your drawing or the dimensions of the current cell and holder through our contact page. Custom projects are reviewed separately from this listed glass SKU.

Additional information

Weight100 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFL002) Glass Fluorescence Cuvette, 21 mm path, 46 mL nominal capacity, Locating Blocks, Pack of 2”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare