Site Navigation

(MQQPA018) Quartz Particle Analysis Cell, 4/25 mm paths, Sloped Frosted Sides

Weight150 g
SKU: MQQPA018

$239.00

In Stock

Quartz particle analysis cell with 4 mm and 25 mm optical paths in one body, Four-Way Light access and an open-top chamber. The sloped frosted sides and 35 × 12 × 63 mm body help you match the cell to your holder and optical layout. The listed price is for 1 cell.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQPA018 is a JGS1 quartz particle analysis cell with 4 mm and 25 mm optical paths built into one body. Its Four-Way Light layout gives optical access from four sides, and the open-top chamber allows direct filling and visual checking before measurement. This format is useful when your holder and method are built around a specific particle-analysis cell geometry rather than a general cuvette shape.

Path Length
4 mm / 25 mm (dual path)
Cell Type
Particle Analysis Cell
Opening Configuration
Open Top

Selection Specifications

Product KindSpecialized Cell
Cell TypeParticle Analysis Cell
Measurement ModeParticle Analysis
Path Length4 mm / 25 mm (dual path)
Light Transmission ConfigurationFour-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
External Dimensions35 × 12 × 63 mm
Body Height63 mm
Base Dimensions35 × 12 mm
Internal Dimensions25 × 4 × 57 mm
MaterialQuartz
Material GradeJGS1
Fabrication MethodStandard 80
Opening ConfigurationOpen Top
Pack Quantity1 Piece
Package Contents1 × Quartz Particle Analysis Cell

Choose this option

Choose MQQPA018 when you need this specific dual-path particle-analysis format: a 4 mm path and a 25 mm path in the same cell, four-side optical access, and an open-top chamber in a 35 × 12 × 63 mm body. The sloped frosted sides are also part of the physical format, so they matter when you are matching holder contact points, orientation and handling space.

What makes this option different

  • 4 mm and 25 mm optical paths in one cell body for methods that use two defined optical directions.
  • Four-Way Light access for optical entry from four sides.
  • Open-top chamber for direct sample loading and visual inspection before measurement.
  • Sloped frosted sides as part of this body style and holder-matching geometry.
  • JGS1 quartz body with a 200–2500 nm stated range.

Structure and dimensions

Product dimensions for checking holder clearance and sample access.
Product dimensions for checking holder clearance and sample access.Open image ↗

Using this cell

Fill the chamber from the open top and keep the measurement orientation consistent between blank, background and sample runs. In particle-analysis work, bubbles, residue and droplets near the optical region can interfere with the reading, so it is worth checking the filled chamber before placing the cell in the instrument.

Use the same optical direction each time for the method you are running. If your procedure uses the 4 mm direction or the 25 mm direction, keep that orientation unchanged throughout the measurement sequence.

First-use check

  1. Inspect the optical faces and sample chamber for chips, residue or dust before use.
  2. Place the empty or blank-filled cell in the holder and confirm stable seating and correct beam alignment.
  3. After filling, remove bubbles and exterior droplets before starting the measurement.

Fit and optical alignment

View the English selection reference. Also available in the product gallery.

The body dimensions are 35 × 12 × 63 mm, and the internal dimensions are 25 × 4 × 57 mm. Check holder clearance against the full body size and sample-access space at the open top. Z Height is not listed here, so beam position should be checked separately if your instrument depends on a defined optical centerline.

English selection reference
Selection reference ↗

Solvents and cleaning

This cell uses Standard 80 adhesive-bonded quartz construction. It is best suited to routine room-temperature aqueous samples and buffers.

Avoid organic samples and organic cleaning solvents with this adhesive-bonded cell. If your method involves organic solvents, heated cleaning or long soaking, ask about a more suitable Sintered or Molded construction before ordering.

Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the exterior optical faces gently with non-abrasive optical tissue.

Included with this option

1 MQQPA018 cell. The listed price is for one cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, windows or Z Height, closure details and fabrication. Send a dimensioned drawing or your current cell reference, together with the sample conditions and required quantity.

Send a product-selection enquiry with SKU MQQPA018, your holder details and delivery destination.

Additional information

Weight150 g

Reviews

There are no reviews yet.

Be the first to review “(MQQPA018) Quartz Particle Analysis Cell, 4/25 mm paths, Sloped Frosted Sides”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare