(MQQFL051) Quartz Flow Cell, 2/22 mm paths, 1.7 mL nominal capacity, Flat Dual-Path Chamber
$636.00
MQQFL051 is a JGS1 quartz flow cell with dual 2 mm and 22 mm optical paths in one flat chamber. It combines Four-Way Light access, a 1.7 mL nominal capacity and opposed quartz tube connections for UV/Vis flow setups that need a broader thin-path chamber than the 1 mm version. Sold as 1 piece.
Description
MQQFL051 is a flat JGS1 quartz flow cell with two optical paths in the same chamber: 2 mm across the thin dimension and 22 mm across the wider dimension. Its Four-Way Light layout and 1.7 mL nominal capacity make it useful for UV/Vis flow arrangements where the chamber orientation and chamber depth both affect how the cell fits into the setup.
- Path Length
- 2 mm / 22 mm (dual path)
- Sample Volume (Nominal)
- 1.7 mL
- Opening Configuration
- Two Opposed Fluid Tubes
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 2 mm / 22 mm (dual path) |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 1.7 mL |
| External Dimensions | 77 × 5 × 25 mm |
| Cell Body Dimensions | 45 × 5 × 25 mm |
| Uncapped Cell Dimensions | 77 × 5 × 25 mm |
| External Dimensions Scope | Uncapped Cell |
| Internal Dimensions | 42 × 22 × 2 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Tube Outer Diameter (OD) | 4 mm |
| Tube Inner Diameter (ID) | 2 mm |
| Fabrication Method | Molded 83 |
| Opening Configuration | Two Opposed Fluid Tubes |
| Fitting Material | Quartz |
| Port Layout | End/side connection at the left in the referenced original; Opposite end/side connection at the right in the referenced original |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose MQQFL051 when you need a flat dual-path chamber but want a 2 mm thin-path dimension rather than 1 mm. The 42 × 22 × 2 mm internal chamber gives more chamber depth than the thinner version while keeping the same 22 mm optical direction across the wider side.
What makes this option different
- Dual optical paths in one body: the same chamber supports both 2 mm and 22 mm measurement directions.
- Flat internal chamber: the chamber is 42 × 22 × 2 mm, not a deep square or cylindrical flow passage.
- Four-Way Light layout: optical access is available from four sides for the stated UV/Vis use.
- Opposed quartz tube connections: the built-in fluid tubes have 4 mm outer diameter and 2 mm inner diameter.
Structure and dimensions

Using this cell
Install the cell in the same orientation you plan to use for blanks and samples. Because two measurement directions are available, method consistency depends on keeping the chosen path and mounting direction the same from run to run.
Fill the chamber slowly and remove bubbles before measurement so the optical region is fully covered. Support the cell by the body during handling rather than by the projecting tubes, and check flow and pressure limits for the complete assembled liquid path.
First-use check
- Inspect the optical faces and tube ends before assembly.
- Verify holder fit and beam alignment in the optical direction you plan to use.
- Fill the chamber, remove bubbles, and run a blank in the same mounted orientation.
Fit and optical alignment
View the English selection reference.
The fixed cell envelope is 77 × 5 × 25 mm, and the optical body is 45 × 5 × 25 mm. Check holder clearance for the 5 mm body thickness and leave extra space for the opposed tube connections and tubing outside the cell.
Z Height is not listed for this SKU, so beam-center fit should be checked against your holder or instrument before ordering. The outside dimensions describe the cell body envelope, not automatic instrument compatibility.

Solvents and cleaning
This cell uses Molded 83 quartz construction. This fabrication is commonly selected for quartz cells used with methods that may involve organic solvents, but chemical suitability still depends on the complete wetted assembly and on your liquid, concentration, temperature and contact time.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials, and clean optical faces gently with non-abrasive optical tissue.
Included with this option
1 Quartz Flow Cell. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes involving path length, chamber size, external envelope, connections, windows or Z Height. Send your drawing or holder details, sample conditions and target quantity through the contact page and include SKU MQQFL051.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.











Reviews
There are no reviews yet.