
Quartz XRD Sample Holder with a Through-Opening: Supporting the Specimen
CUSTOM DESIGN GUIDE · MQXRD010
MQXRD010 has a 20 × 16 mm rectangular through-opening in a 55 × 35 × 1.6 mm quartz plate. The opening leaves the sample-support arrangement to the proposed assembly. Selecting this form therefore starts with the specimen and measurement plane, rather than the outside plate dimensions alone.

Use and purpose · Specifications · In practice · Custom example · Buy or enquire
An opening is different from a sample pocket
A recessed tray provides a base beneath a specimen. A through-opening has no such sample-supporting floor, so the specimen or a separate support has to span or occupy it. The bare holder does not include a film, backing plate or cover.
That difference can be useful when a method needs a defined opening within a plate-like carrier. It also makes the added support a real part of the measurement arrangement. Its material and location belong beside the specimen, rather than remaining an invisible detail below the holder.
MQXRD010 configuration
Put the specimen at the required measurement height
The 1.6 mm thickness describes the plate. It does not establish the specimen surface height: that follows from the way the specimen and support sit relative to the plate and instrument seat. A section through the assembled holder explains the relationship.
In reflection powder XRD, correct specimen height and surface geometry matter to the measurement. The proposed mounting method should therefore locate the sample plane deliberately. That general principle is not a measured diffraction-background result for this quartz holder. [1]
The instrument seat and sample opening have different boundaries
The 55 × 35 mm outside envelope locates the carrier mechanically. The 20 × 16 mm opening describes the region available to the proposed specimen support. A change to one need not be the same change to the other.
The useful installation drawing shows the seat contacts, insertion direction, opening and sample plane together. This makes it possible to discuss a new opening while retaining the instrument interface, without assuming fit with a named diffractometer from the outside size alone.
A custom example: change the opening and retain the instrument seat
ILLUSTRATIVE DESIGN EXAMPLE
Suppose an instrument's carrier seat is fixed, but a specimen support needs a different rectangular opening. A proposed holder can retain the outer locating geometry and define the new cutout from it. The support and specimen height are shown separately so the opening change does not silently change the measurement plane.
Order the listed configuration or discuss a change
View MQXRD010 and current pricing. For a custom version, send a labelled sketch that separates the features to retain from the changes you want.
Reference MQXRD010 with the instrument seat, required opening and a section through the specimen support. Mark the measurement plane and specimen details, then add quantity, destination and requested date.





Recent Comments