(C052CF) Quartz Standard Cuvette, 5 mm Path, 1.75 mL

Weight	30 g

SKU: C052CF

Original price was: $95.00.Current price is: $86.00.

In Stock

C052CF is a JGS1 quartz standard cuvette with a 5 mm optical path, Two-Way Light layout and 1.75 mL nominal capacity. Its open-top body allows direct filling, a lid is included, and the listed uncapped body size is 12.5 × 7.5 × 45 mm.

In Stock

SKU: C052CF Categories: Cuvettes, Products, Quartz Standard Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C052CF is a JGS1 quartz standard cuvette for methods built around a 5 mm optical path in a familiar rectangular cell format. This version combines direct top access, Two-Way Light transmission and 1.75 mL nominal capacity, so you can match both the optical path and the filling style to routine UV/Vis work. A lid is included, while the stated 12.5 × 7.5 × 45 mm dimensions apply to the uncapped cell body for holder planning.

Path Length: 5 mm
Sample Volume (Nominal): 1.75 mL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Standard Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	5 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	1.75 mL
External Dimensions	12.5 × 7.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 7.5 × 45 mm
Overall Height without Closure	45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes
Fabrication Method	Molded 0.01
Opening Configuration	Open Top (Cell Body)

Choose this option

Choose C052CF when you need a 5 mm quartz cell with straightforward top filling and a covered handling option. The open sample chamber makes pipette loading and rinsing simple, while the included lid can cover the top during handling or measurement setups that use this style. This model also uses Molded 0.01 fabrication, which is the MQ option generally selected for applications that need tighter optical-path control as part of the cuvette choice.

What makes this option different

5 mm optical path: match the measurement method to this transmission distance and align the beam through the sample region.
Two-Way Light: align the opposing optical faces with the transmission beam and use the same orientation for blank and sample readings.
1.75 mL nominal capacity: plan the working fill and beam footprint together so liquid covers the illuminated region; nominal capacity is not a minimum working fill.
Accompanying closure: cover the opening after preparation and allow room to remove it; no pressure or leak-tight rating is specified.
Molded 0.01 option: review the required optical-path tolerance and measurement conditions for your order when precision is central to the method.

Using this cell

Fill the sample chamber from the top opening and make sure the liquid covers the beam used by your instrument. Before reading, remove visible bubbles and keep the same cell orientation for blank and sample when your procedure depends on repeatable positioning.

Handle the cuvette by the non-optical faces where possible so the transmission windows stay clean. The lid is useful as a cover, but this product data does not establish a pressure-rated or leak-tested assembly.

First-use check

Before first use, inspect the optical faces, rinse the cell with a suitable liquid for your method, and confirm that it sits squarely in the holder. Then run a blank and verify that the filled sample level covers the beam path in your instrument.

Fit and optical alignment

The stated 12.5 × 7.5 × 45 mm size applies to the uncapped cell body. Use those dimensions for holder seating and compartment checks, then allow additional top clearance in your setup if you plan to keep the lid in place during use.

Z Height is not stated for this exact option. If your instrument, holder or autosampler depends on a defined beam-center height, confirm that requirement before ordering rather than relying on outer body size alone.

Solvents and cleaning

For a method with a defined optical path tolerance, specify that tolerance and its measurement conditions when selecting the Molded 0.01 option. The final requirement is agreed for the order.

Molded 0.01 is the fabrication used for this listing. Select sample and cleaning conditions for the complete cell setup you will actually use, especially if the liquid may contact the lid or any sealing surfaces, because detailed chemical limits for this exact assembly are not established here.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the outer optical faces gently with non-abrasive optical tissue.

Included with this option

This configuration includes an accompanying closure. Confirm the cell quantity and any separately specified accessories covered by your order.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication details. Send a dimensioned drawing or labelled sketch, holder information and sample conditions through Discuss your requirements and quote part number C052CF.