(C032CR3) Quartz Rectangular Sample Cell, 3 mm Path, 1.05 mL

Weight	30 g

SKU: C032CR3

Original price was: $75.00.Current price is: $68.00.

In Stock

C032CR3 is a JGS3 quartz rectangular sample cell for infrared spectroscopy and visible absorbance measurements. It combines a 3 mm optical path, Two-Way Light transmission, a 1.05 mL nominal capacity and an open-top format with an included closure. Supplied as 1 cell.

In Stock

SKU: C032CR3 Categories: Cuvettes, Products, Quartz Standard Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C032CR3 is a JGS3 quartz rectangular sample cell for infrared spectroscopy and visible absorbance work. Its 3 mm optical path, Two-Way Light layout and 1.05 mL nominal capacity make it a practical choice when your method needs a short transmission path in a slim rectangular body rather than a larger cell format. The body measures 12.5 × 5.5 × 45 mm, and the cell is supplied as 1 piece with an open top and included closure.

Path Length: 3 mm
Sample Volume (Nominal): 1.05 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Rectangular Sample Cell
Measurement Mode	Infrared Spectroscopy; Visible Absorbance Spectroscopy
Pack Quantity	1 Piece
Path Length	3 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	260 nm
Wavelength Range — Upper Limit	3500 nm
Sample Volume (Nominal)	1.05 mL
External Dimensions	12.5 × 5.5 × 45 mm
Cell Body Dimensions	12.5 × 5.5 × 45 mm
External Dimensions Scope	Body Only
Material	Quartz
Material Grade	JGS3
Closure Type	Lid
Closure Included	Yes
Opening Configuration	Open Top

Choose this option

Choose C032CR3 when your setup is written around a 3 mm rectangular transmission cell and you want direct access from the top for filling and rinsing. The JGS3 quartz body is specified for use from 260 to 3500 nm, so this model suits infrared measurements while also covering visible absorbance work. Its nominal 1.05 mL capacity gives a useful planning point for sample preparation without moving to a wider body style.

What makes this option different

3 mm optical path for methods that use a short rectangular transmission length.
Two-Way Light configuration with opposed optical faces for straightforward transmission measurements.
Open-top access with included closure for direct filling and routine handling.
12.5 × 5.5 × 45 mm body size in a slim rectangular format, with dimensions stated for the body only.

Using this cell

Fill the cell from the open top and make sure the sample covers the beam area before measurement. Use the 3 mm path length in your method calculations, remove visible bubbles, and keep the same orientation between blank and sample runs.

Handle the cell by the non-optical sides where possible. Keeping the transmission faces free from fingerprints, droplets and dried residue helps maintain a clean optical path during routine work.

First-use check

Inspect the optical faces under good light when the cell arrives. Rinse with a suitable liquid for your method, fill with a blank, and confirm that the beam passes cleanly through the intended faces without bubbles or visible residue in the light path.

Fit and optical alignment

The stated 12.5 × 5.5 × 45 mm dimensions refer to the body only. If your instrument compartment or holder is closely fitted, check slot width, seating depth and top clearance, because the body dimensions do not include the closure above the opening.

Z Height is not specified for this item. If your holder or instrument requires a defined beam-center height, confirm that point before ordering.

Solvents and cleaning

This quartz cell is intended for infrared and visible transmission use, but the chemical limits for this exact SKU are not stated here. If your samples or cleaning steps involve aggressive chemicals, extended contact time or heated cleaning, review suitability before routine use.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue. For general background on MQ cuvette construction options, see fabrication method of cuvettes.

Included with this option

One C032CR3 rectangular sample cell with included closure.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different path length, body size, sample volume, optical window arrangement, Z Height or closure style, we can review a custom JGS1 quartz version. Please send your drawing or labelled sketch, holder or instrument details, critical dimensions and tolerances, sample conditions and target quantity through our contact page, and quote part number C032CR3.