(C304WS) Quartz Flow Cell, 10 mm / 30 mm (dual path) Path, 10.5 mL

Weight	100 g

SKU: C304WS

Original price was: $802.00.Current price is: $722.00.

In Stock

C304WS is a JGS1 quartz flow cell with 10 mm and 30 mm stated optical paths, Four-Way Light access and a 10.5 mL nominal capacity. Two opposed quartz fluid tubes with 5 mm OD and 3 mm ID help you plan the cell body and line connection together. Sold as 1 piece.

In Stock

SKU: C304WS Categories: Cuvettes, Products, Quartz Custom Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C304WS is a JGS1 quartz flow cell for fluorescence work that uses a larger flow chamber and two stated optical path directions in one body. Its 10 mm / 30 mm dual-path layout, Four-Way Light geometry and 10.5 mL nominal capacity make it useful when you need multi-side optical access and a straight opposed-tube connection arrangement in the same assembly.

Path Length: 10 mm / 30 mm (dual path)
Sample Volume (Nominal): 10.5 mL
Opening Configuration: Two Opposed Fluid Tubes

Selection Specifications

Product Kind	Flow Cell
Cell Type	Flow Cell
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm / 30 mm (dual path)
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	10.5 mL
External Dimensions	76 × 12.5 × 32.5 mm
Cell Body Dimensions	35 × 12.5 × 32.5 mm
Material	Quartz
Material Grade	JGS1
Port Count	2
Tube Outer Diameter (OD)	5 mm
Tube Inner Diameter (ID)	3 mm
Fabrication Method	Molded 83
Opening Configuration	Two Opposed Fluid Tubes
Wall Thickness	1.25 mm

Choose this option

Choose C304WS when your setup needs this dual-path flow-cell format rather than a single-path body. The combination of a larger nominal chamber, four optical sides and opposed end tubes suits installations where the cell must fit into both the optical layout and the liquid-handling layout at the same time.

What makes this option different

10 mm / 30 mm dual path gives two stated optical path directions within one cell body.
Four-Way Light geometry provides optical access from multiple sides for fluorescence arrangements.
10.5 mL nominal capacity supports methods built around a larger filled cell volume.
Two opposed quartz tubes, 5 mm OD / 3 mm ID provide a defined straight-through connection layout.

Using this cell

Support the cell by the main body during installation and connect the two opposed tubes without twisting or side-loading them. Fill gradually and check the illuminated region before measurement so that bubbles or incomplete wetting do not remain in the optical area.

The 10.5 mL figure is the nominal cell volume. It is not a stated minimum working volume, and it does not describe the total volume of any attached tubing or the rest of the fluid circuit.

No pressure limit is stated for this SKU. If your method involves pressurized flow, please review the full connection and operating conditions before use.

First-use check

Inspect the optical faces and both tube ends for chips, dust or handling residue.
Place the cell in the intended holder and confirm that the body and tube span have enough clearance.
Fill with a suitable blank, remove visible bubbles from the illuminated region and then run the measurement in the same orientation.

Fit and optical alignment

The overall span is 76 × 12.5 × 32.5 mm, while the optical body itself is 35 × 12.5 × 32.5 mm. This matters when you are checking holder space, because the body fit and the full installed length with projecting tubes are different.

Z Height is not listed for this cell. If your holder or fluorometer requires a defined beam-center height, check that separately rather than using the overall height as a substitute.

The two end tubes are shown as opposed connections, but no inlet or outlet role is assigned. Plan flow direction according to your own tubing layout and fixture design.

Solvents and cleaning

This cell is listed as Molded 83. This fabrication type is commonly chosen for methods involving organic solvents and temperature-related applications, but suitability still depends on the complete wetted assembly and your actual liquid conditions.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning materials, and clean the optical faces gently with non-abrasive optical tissue or another suitable lint-free material.

Included with this option

1 flow cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz projects for changes to path length, chamber volume, body dimensions, optical access and connection geometry. Send your drawing or labelled sketch, holder or instrument details, sample conditions and quantity if you need a different configuration from the listed SKU.

Send a product-selection enquiry and quote part number C304WS.