(C104WE) Quartz Fluorescence Cuvette, 10 mm Path, 3.5 mL

Weight	30 g

SKU: C104WE

Original price was: $380.00.Current price is: $342.00.

In Stock

Quartz fluorescence cuvette with a 10 mm optical path, Four-Way Light access and 3.5 mL nominal capacity. This option combines a round-bottom profile with a PTFE three-way valve assembly and 8 mm OD / 4 mm ID tube dimensions, so connection layout and installed clearance matter alongside the optical path. The listed price is for 1 cuvette.

In Stock

SKU: C104WE Categories: Cuvettes, Products, Quartz Custom Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104WE is a quartz fluorescence cuvette with a 10 mm optical path, Four-Way Light access and 3.5 mL nominal capacity. Its round-bottom version is combined with a PTFE three-way valve assembly, making this option relevant when you need connected sample handling and need to match the specified body profile rather than choosing an open-top cell.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Opening Configuration: Three-Way Valve Assembly

Selection Specifications

Product Kind	Specialized Cell
Cell Type	Fluorescence Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Sample Volume (Nominal)	3.5 mL
Cell Body Dimensions	12.5 × 12.5 × 45 mm
Body Height	45 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Closure Type	Valve
Closure Material	PTFE
Tube Outer Diameter (OD)	8 mm
Tube Inner Diameter (ID)	4 mm
Fabrication Method	Molded 83
Opening Configuration	Three-Way Valve Assembly

Choose this option

Choose C104WE when your method needs a 10 mm fluorescence cell with optical access from four sides and sample introduction through a valve assembly. The round-bottom version keeps that profile choice explicit, while the stated 8 mm OD / 4 mm ID tube dimensions help you plan tubing and clearance around the cell instead of looking only at the optical body.

What makes this option different

10 mm optical path suits methods written around this path length.
Four-Way Light layout provides optical access on four sides around the sample region.
Round-bottom version preserves the specified profile distinction for setups that need this option rather than a flat-bottom alternative.
PTFE three-way valve assembly supports connected filling or transfer instead of direct top access.
8 mm OD / 4 mm ID tube dimensions help you match the connection size and routing space in your setup.
Quartz cell with Molded 83 fabrication is a useful choice direction for methods involving organic-solvent work, while full chemical suitability still depends on the complete assembly and actual conditions.

Using this cell

Introduce the sample through the valve assembly in the intended operating orientation of your setup. Keep the optical faces clean and make sure the sample covers the illuminated region during measurement. The stated 3.5 mL is the nominal chamber capacity, not a minimum working volume.

For fluorescence work, keep blank and sample in the same orientation. If your method is sensitive to bubbles, inspect the beam area carefully after filling and clear any trapped air before measurement.

First-use check

Inspect the optical faces for dust, residue or handling marks.
Check holder fit against the 12.5 × 12.5 mm body section.
Confirm your tubing fit for the stated 8 mm OD / 4 mm ID connection dimensions.
Run a blank in the same orientation planned for sample measurement.

Fit and optical alignment

The confirmed body dimensions apply to the optical cell body below the valve assembly: 12.5 × 12.5 mm body section and 45 mm body height. These dimensions are useful for checking holder space around the optical portion of the cell.

The complete installed envelope is larger because the valve assembly and tubing extend beyond the body dimensions above. Z Height is not available for this SKU, so do not assume beam-center compatibility from the body size alone; check against your instrument or holder if beam position is fixed.

Solvents and cleaning

This quartz cell is recorded with supplier-described optical-contact integrated construction and the current Molded 83 fabrication option. For customer selection, that fabrication is commonly chosen for methods involving organic solvents, but it does not by itself establish a complete chemical-compatibility list for the assembled cell.

Choose samples and cleaning liquids that suit the full assembly, including the valve area and PTFE components. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning methods, and clean the optical faces with non-abrasive optical tissue or swabs.

General fabrication background is available here: MQ Cuvette Fabrication Glossary.

Included with this option

1 cuvette per listed price unit.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes to dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch, together with holder details, sample conditions and target quantity. Discuss your requirements.