(C205WS) Quartz Fluorescence Cuvette, 20 mm Path

Weight	30 g

SKU: C205WS

Original price was: $270.00.Current price is: $243.00.

In Stock

C205WS is a JGS1 quartz fluorescence cuvette with a 20 mm optical path, a Five-Way Light configuration and an open-top shallow chamber for direct sample access. Its 20 × 20 × 7.5 mm internal dimensions suit methods that need a broad, shallow sample region rather than a tall standard body.

In Stock

SKU: C205WS Categories: Cuvettes, Products, Quartz Custom Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C205WS is a shallow JGS1 quartz fluorescence cuvette with a 20 mm optical path and an open-top sample chamber. This format gives direct access for filling, inspection and rinsing, while the compact uncapped 21 × 21 × 8.5 mm outer size can suit dedicated stages, recessed mounts and other layouts with limited vertical clearance.

The cell uses a Five-Way Light configuration for fluorescence spectroscopy and provides a 20 × 20 × 7.5 mm internal sample region. Its supplier-described fused integrated construction is paired here with an open chamber layout, so you can work directly in the sample area without a built-in closure above the opening.

Path Length: 20 mm
Cell Type: Fluorescence Cuvette
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Fluorescence Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	20 mm
Light Transmission Configuration	Five-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
External Dimensions	21 × 21 × 8.5 mm
Uncapped Cell Dimensions	21 × 21 × 8.5 mm
External Dimensions Scope	Uncapped Cell
Internal Dimensions	20 × 20 × 7.5 mm
Material	Quartz
Material Grade	JGS1
Opening Configuration	Open Top

Choose this option

Choose C205WS when you need a 20 mm fluorescence cell in a shallow open format instead of a taller cuvette body. The broad top opening helps with direct pipetting and visual checking of the sample region, and the low-profile square body is useful where stage height, cover clearance or surrounding fixture space is limited.

What makes this option different

20 mm optical path in a shallow fluorescence-cell format rather than a tall body.
Open-top access lets you fill, inspect and rinse the chamber directly from above.
Five-Way Light configuration supports fluorescence setups that use this optical access pattern.
20 × 20 × 7.5 mm internal dimensions create a broad, shallow sample region.
Compact uncapped outer dimensions of 21 × 21 × 8.5 mm help when holder depth or vertical space is tight.
Fused integrated construction keeps the body in an assembled format for handling and open-top rinsing; support the shallow body when placing it in your fixture.

Using this cell

Fill the chamber from the top and add sample carefully so the illuminated region is covered in your actual measurement setup. The open format makes it easier to see the liquid surface, check for bubbles and remove residual droplets between runs.

Use a stable holder or stage that supports the shallow body evenly. Keep the cell orientation consistent between blank and sample measurements when your fluorescence setup uses a defined excitation and collection direction.

First-use check

Inspect the chamber and optical faces for dust, residue or transit marks.
Place the empty cell in your holder and confirm that it seats evenly without tilt.
Run a blank in the intended orientation and verify beam alignment through the sample region.

Fit and optical alignment

Use the listed 21 × 21 × 8.5 mm dimensions as the uncapped cell envelope when checking recess size, side clearance and access above the opening. These dimensions describe the bare cell only, not installed clearance with any separate cover, clamp or fixture.

Z Height is not stated for this SKU. If your instrument requires a defined beam-center height, check that point before ordering. Nominal capacity and minimum working volume are also not stated here, so filling level should be established in the holder and optical geometry you plan to use.

Solvents and cleaning

This cell is made from quartz and specified for fluorescence work across 200–2500 nm. Chemical compatibility limits for this exact SKU are not established here, so match your sample, rinse solvent and cleaning method to your own operating conditions before routine use.

For fabrication background, see MQ Cuvette Fabrication Glossary. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue.

Included with this option

One cuvette.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz projects for requirements involving dimensions, optical path length, sample region geometry, optical windows, Z Height, closures, connections and tolerances. Send a dimensioned drawing or labelled sketch together with holder details, sample conditions and target quantity. Discuss your requirements and quote part number C205WS.