(C054CS) Quartz Fluorescence Cuvette, 5 mm Path, 875 µL

Weight	30 g

SKU: C054CS

Original price was: $156.00.Current price is: $141.00.

In Stock

C054CS is a JGS1 quartz fluorescence cuvette with a 5 mm optical path, Four-Way Light access and an 875 µL nominal capacity. Its black-wall, open-top body combines a compact 5 × 5 mm internal cross-section with a 12.5 × 12.5 × 45 mm uncapped format for fluorescence work that uses a smaller sample chamber and light-shielding around the sample region. Supplied as 1 cuvette.

In Stock

SKU: C054CS Categories: Cuvettes, Products, Quartz Custom Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C054CS is a JGS1 quartz fluorescence cuvette with a 5 mm optical path, a black-wall body and Four-Way Light access. Its compact 5 × 5 mm internal cross-section and 875 µL nominal capacity make it a practical choice when you want a smaller fluorescence sample chamber, while the open top keeps filling and rinsing straightforward. This listing is for 1 cuvette.

Path Length: 5 mm
Sample Volume (Nominal): 875 µL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Fluorescence Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	5 mm
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	875 µL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Body Height	45 mm
Base Dimensions	12.5 × 12.5 mm
Internal Dimensions	5 × 5 mm
Material	Quartz
Material Grade	JGS1
Fabrication Method	Standard 80
Opening Configuration	Open Top

Choose this option

Choose C054CS when your method uses a 5 mm path and you want a compact fluorescence cell with light-shielding around the sample region. The Four-Way Light layout is useful for fluorescence beam arrangements that rely on side optical access as well as the main path, and the open-top body suits routine pipetting, rinsing and inspection between runs.

What makes this option different

5 mm optical path for fluorescence methods specified around this path length.
Four-Way Light geometry, giving optical access through more than one face for fluorescence setups that use side access in addition to the main beam path.
Black-wall body for light-shielding use around the sample region.
5 × 5 mm internal cross-section with 875 µL nominal capacity for a compact sample chamber.
Open-top format for direct filling and rinsing.
Standard 80 adhesive-bonded quartz construction.

Using this cell

Fill the cell from the top and keep the same orientation for blanks and samples so the optical geometry remains consistent. Because the chamber is compact, inspect the beam region carefully and remove bubbles or droplets before measurement.

The stated 875 µL value is a nominal capacity, not a minimum working volume. The listed 5 × 5 mm internal dimensions describe the chamber cross-section, so if you plan to work at low fill levels, make sure the liquid level covers the measurement region in your instrument.

First-use check

Inspect the optical faces, top opening and body edges for chips, dust or scratches.
Rinse before first use with a cleaning liquid suitable for your method.
Place the cuvette in the holder and verify orientation through the intended optical faces.
Run a blank in the same orientation planned for sample measurements.

Fit and optical alignment

The uncapped outer dimensions are 12.5 × 12.5 × 45 mm, with a 12.5 × 12.5 mm base. Use those dimensions to check holder fit, seating and clearance around the body.

This is an open-top cell, so plan for use as an open cuvette unless your setup provides its own compatible cover arrangement. Four-Way Light indicates multi-face optical access, not universal instrument compatibility. If your instrument depends on a defined beam-center height, note that Z Height is not established for this SKU and should be checked separately.

Solvents and cleaning

Standard 80 is the MQ option for routine water-based samples and buffers at room temperature. In this SKU, that corresponds to an adhesive-bonded quartz construction, so it is better suited to water-based work than to organic sample solvents or organic cleaning agents. If your method involves organic solvents, ask about a more suitable sintered or molded quartz alternative.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Clean the optical faces gently with non-abrasive optical tissue and avoid leaving dried residue in the chamber.

Included with this option

Price is for 1 cuvette, supplied as the listed C054CS specification.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch together with holder details, wavelength range, sample conditions and target quantity. Prototype batches typically involve 2–4 cells; feasibility, final specifications, price and production time are confirmed in the project quotation. Discuss your requirements and mention part number C054CS.

Design notes for this configuration: 5 mm Black-Wall Quartz Cuvette: Arranging Excitation and Collection