(C062CR) Quartz Large-Window Cuvette, 6 mm Path, 4.5 mL

Weight	100 g

SKU: C062CR

Original price was: $123.00.Current price is: $111.00.

In Stock

C062CR is a JGS1 quartz large-window cuvette for UV/Vis spectroscopy, with a 6 mm optical path, 4.5 mL nominal capacity and Two-Way Light layout. Its open-top body gives direct access to the sample chamber in a compact 27.5 × 8.5 × 40 mm uncapped format. Sold as 1 cuvette per listed price unit.

In Stock

SKU: C062CR Categories: Cuvettes, Products, Quartz Large Window Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C062CR is a JGS1 quartz large-window cuvette for UV/Vis spectroscopy from 200 to 2500 nm. This option combines a 6 mm optical path with a 4.5 mL nominal capacity in an open-top body, making it suitable when you need this path length together with direct filling and a larger chamber than a micro-format cell.

Path Length: 6 mm
Sample Volume (Nominal): 4.5 mL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Large-Window Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	6 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	4.5 mL
External Dimensions	27.5 × 8.5 × 40 mm
Uncapped Cell Dimensions	27.5 × 8.5 × 40 mm
Overall Height without Closure	40 mm
External Dimensions Scope	Uncapped Cell
Body Height	40 mm
Internal Dimensions	24.5 × 6 × 38.5 mm
Material	Quartz
Material Grade	JGS1
Opening Configuration	Open Top (Cell Body)

Choose this option

Choose C062CR when your method calls for a 6 mm path and you want straightforward top access to the sample chamber. The large-window body is compact in height at 40 mm overall without a closure, while the open design makes pipetting, rinsing and visual checking simple during routine UV/Vis work.

What makes this option different

6 mm optical path for UV/Vis measurements set up around this transmission length.
4.5 mL nominal capacity in a large-window body for a larger sample chamber.
Open-top construction for direct filling, removal and inspection of the sample.
Two-Way Light layout for transmission through two opposing optical faces.

Using this cell

Fill the cuvette from the open top and make sure the liquid fully covers the beam area used by your instrument. Keep the optical faces clean and free from droplets, bubbles and fingerprints, and handle the body by non-optical areas where possible.

The stated 4.5 mL is the nominal chamber capacity, not a minimum working volume. If you intend to measure at reduced fill levels, check beam coverage in your own setup before using valuable samples.

First-use check

Inspect the cuvette for chips, residue and shipping damage.
Place the empty cell in the holder to confirm seating and clearance.
Rinse with a suitable blank or compatible liquid before first use.
Verify that the beam passes through the intended faces at your planned fill level.

Fit and optical alignment

The uncapped body measures 27.5 × 8.5 × 40 mm, with an internal chamber size of 24.5 × 6 × 38.5 mm. Check your holder against the full body size, not just the optical path length, especially if the slot or surrounding compartment space is limited.

Z Height is not specified for this option. If your setup depends on a defined beam-center height, confirm that separately before ordering rather than assuming compatibility from the outside dimensions or the 6 mm path alone.

Solvents and cleaning

This cuvette is made from JGS1 quartz, and the source names the construction as powder-fused. For general fabrication background, see Compare fabrication options.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. The chemical limits of this assembled cell are not specified here, so if your sample or cleaning routine involves aggressive chemicals, please check the full liquid, concentration, temperature and contact-time conditions before ordering.

Included with this option

1 cuvette per listed price unit. If you need a supplied closure or other accessory, contact us before ordering.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions of this cuvette style for changes involving dimensions, optical path length, sample volume, openings, fit-related details or other holder requirements. Send a dimensioned drawing or labelled sketch, plus your holder details, wavelength range, sample conditions and target quantity, through the contact page.