(C104CS23) Quartz Micro Cuvette, 10 mm / 3 mm (dual path) Path, 1.05 mL, Pack of 2

Weight	30 g

SKU: C104CS23

Original price was: $143.00.Current price is: $129.00.

In Stock

JGS1 quartz micro cuvette for fluorescence spectroscopy with a 10 mm primary path, 3 mm secondary path and Four-Way Light layout. The 1.05 mL nominal capacity and 3 mm stated sample-region width help when you need a compact fluorescence cell with side optical access. Sold as a pack of 2 cuvettes; lids are included.

In Stock

SKU: C104CS23 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CS23 is a JGS1 quartz micro cuvette for fluorescence spectroscopy with a 10 mm primary path and a stated 3 mm secondary path in a Four-Way Light body. Its 1.05 mL nominal capacity gives you a compact cell format for routine fluorescence work, while the two-cuvette sale unit suits labs that want the same geometry available for parallel preparation, repeat runs or a spare in the same order.

The supplied lids help cover the open top during handling, but the verified outer dimensions apply to the uncapped cell body only. If your setup depends on a fixed beam height, check the seated beam position in your holder because Z Height is not established for this item.

Path Length: 10 mm / 3 mm (dual path)
Sample Volume (Nominal): 1.05 mL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	Pack of 2
Path Length	10 mm / 3 mm (dual path)
Light Transmission Configuration	Four-Way Light
Optical Window Dimensions	3 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.05 mL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes
Fabrication Method	Standard 80
Detection Channel Width	3 mm

Choose this option

Choose C104CS23 when you need a fluorescence micro cuvette with four-side optical access and a defined dual-path format rather than a simple two-window transmission cell. The 10 mm main path supports standard absorption-style alignment, while the stated 3 mm secondary path and 3 mm sample-region width help when your method or holder needs a more compact illuminated region.

What makes this option different

10 mm primary path with an additional stated 3 mm secondary path.
Four-Way Light layout for optical access from more than one face.
1.05 mL nominal capacity in a compact micro cuvette format.
Sold as 2 cuvettes per listed price unit, with lids included.

Using this cell

Fill each cuvette from the top and make sure the sample covers the illuminated region used by your method. For fluorescence work, keep cell orientation consistent between blank, standard and sample measurements so the same faces and beam path are used each time.

The nominal 1.05 mL value describes the cuvette capacity, not a minimum working volume. If you plan to work close to your lowest practical fill level, check coverage in your own holder before routine measurements.

First-use check

Inspect both cuvettes before first use for dust, chips or handling marks on the optical faces. Rinse with a method-compatible liquid if needed, seat the lids gently, and run a blank in the same holder position you will use for measurements.

Fit and optical alignment

The uncapped cell body is 12.5 × 12.5 × 45 mm. Use those dimensions for holder clearance around the body, and allow extra top space for the supplied lid because lid height is not included in the verified dimensions.

Z Height is not established for this SKU. The stated 3 mm dimension refers to the sample-region width, not beam-center height, so instruments with a fixed beam position should be checked against the actual seated cell.

Solvents and cleaning

This adhesive-bonded construction corresponds to Standard 80. It is intended for routine room-temperature water-based work, and the supplier restricts this option to neutral samples.

A complete solvent compatibility list is not established for this cuvette. Avoid organic samples and organic cleaning agents with this adhesive-bonded option. Do not use hydrofluoric acid on quartz, and avoid hot strong alkalis and abrasive cleaning materials.

Included with this option

2 quartz micro cuvettes, lids and a storage box.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes to dimensions, optical path length, sample volume, optical access, Z Height, closures and fabrication. Send a labelled sketch or dimensioned drawing together with your holder details, beam position and sample conditions via our contact page, and quote C104CS23.