(C104CS44) Quartz Micro Cuvette, 10 mm / 5 mm (dual path) Path, 1.75 mL

Weight	30 g

SKU: C104CS44

Original price was: $72.00.Current price is: $65.00.

In Stock

This JGS1 quartz micro cuvette combines a 10 mm primary path with a 5 mm secondary path in a Four-Way Light format for fluorescence measurements. This Standard 80 adhesive-bonded version is restricted to neutral samples and is supplied as 1 cuvette with lid included. Its nominal capacity is 1.75 mL.

In Stock

SKU: C104CS44 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CS44 is a JGS1 quartz micro cuvette for fluorescence spectroscopy, combining a 10 mm primary path, a 5 mm secondary path and Four-Way Light optical access in a compact cell body. The key selection point for this version is its Standard 80 adhesive-bonded construction, which the supplier restricts to neutral samples. This listing is supplied as 1 cuvette with lid included.

Path Length: 10 mm / 5 mm (dual path)
Sample Volume (Nominal): 1.75 mL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm / 5 mm (dual path)
Light Transmission Configuration	Four-Way Light
Optical Window Dimensions	5 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.75 mL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes
Fabrication Method	Standard 80
Detection Channel Width	5 mm

Choose this option

Choose this cell when you need the stated 10 mm / 5 mm dual-path fluorescence geometry and your sample chemistry stays within the neutral-sample limit. The optical layout and compact nominal volume suit routine micro-cuvette work, but the sample and cleaning liquids both need to match the restrictions of this adhesive-bonded version.

What makes this option different

10 mm / 5 mm dual path gives the stated optical geometry in one cell body.
Four-Way Light configuration provides optical access from four faces around the sample region.
Standard 80 adhesive-bonded construction is the defining build feature of this option.
Restricted to neutral samples makes sample chemistry part of the selection decision.

Using this cell

Fill the cell carefully through the top opening and place the lid gently after loading the sample. Use the same orientation for blank and sample measurements, and inspect the sample region for bubbles or residue before placing the cuvette in the holder.

This version is intended for neutral samples, so review both the sample solution and the cleaning liquid before use. The stated 1.75 mL nominal capacity should not be treated as a verified minimum working volume for every beam layout.

First-use check

Inspect the optical faces, top opening and lid seating area before first use.
Confirm holder fit and beam placement with a suitable blank before running samples.
Verify that your sample and cleaning conditions stay within the neutral-sample limit of this version.

Fit and optical alignment

The stated dimensions are 12.5 × 12.5 × 45 mm for the uncapped cell body. Check holder fit for the body itself, and allow additional clearance if the lid remains on during measurement because the installed lid height is not specified here.

Z Height is not specified for this option. If your instrument requires a defined beam-center height, please check that requirement before ordering.

Solvents and cleaning

This cuvette uses Standard 80 adhesive-bonded quartz construction. For this SKU, it is restricted to neutral samples, so it is best suited to room-temperature water-based samples or buffers that stay within that range.

Avoid organic sample solvents and organic cleaning agents with this option. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials, and wipe the optical faces with non-abrasive optical tissue.

Included with this option

1 Quartz Micro Cuvette with lid included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz versions for changes to dimensions, path length, sample volume, optical windows, Z Height, closures and related tolerances. If you need a different chemistry range or holder fit, send your drawing or holder details and sample conditions, then discuss your requirements with reference to C104CS44.