(C0.54SS) Quartz Micro Cuvette, 0.5 mm Path, 175 µL

Weight	30 g

SKU: C0.54SS

Original price was: $323.00.Current price is: $291.00.

In Stock

C0.54SS is a JGS1 quartz micro cuvette with a 0.5 mm optical path, 175 µL nominal capacity and Four-Way Light configuration. Its stoppered format suits short-path measurements that also need side optical access. Supplied as 1 cuvette per listed price unit, with a closure included.

In Stock

SKU: C0.54SS Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C0.54SS is a JGS1 quartz micro cuvette for UV/Vis work across 200–2500 nm when your method calls for a very short 0.5 mm path. It combines a 175 µL nominal capacity with a stoppered format and Four-Way Light configuration, which makes it useful when you need a compact short-path cell with side optical access as well as the main transmission direction. The listed price is for 1 cuvette.

Path Length: 0.5 mm
Sample Volume (Nominal): 175 µL
Closure Type: Stopper

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	0.5 mm
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	175 µL
External Dimensions	3 × 12.5 × 45 mm
Cell Body Dimensions	3 × 12.5 × 35 mm
Uncapped Cell Dimensions	3 × 12.5 × 45 mm
Overall Height without Closure	45 mm
External Dimensions Scope	Uncapped Cell
Body Height	35 mm
Base Dimensions	12.5 × 3 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Stopper
Closure Included	Yes
Fabrication Method	Molded 83

Choose this option

Choose C0.54SS when the required path length is 0.5 mm and you want that geometry in a compact quartz cell rather than a larger chamber. The stoppered opening is useful for covered handling after filling, while the Four-Way Light layout matters if your setup uses side optical access in addition to the main path.

What makes this option different

0.5 mm optical path for short-path measurement setups.
175 µL nominal capacity in a compact Micro Cuvette format.
Four-Way Light configuration with side optical access in addition to the main transmission direction.
Stoppered JGS1 quartz cell; sold as 1 cuvette per listed price unit.

Using this cell

Fill the cell carefully so the illuminated sample region is fully covered and free from bubbles, then seat the stopper gently. In short-path work, keep the same orientation and seating for blank and sample measurements so the optical path and beam position stay consistent between runs.

The 175 µL figure is a nominal capacity, not a minimum working volume. If you work below the nominal fill, verify in your own setup that the liquid level still covers the beam throughout the measurement.

First-use check

Inspect the optical faces and edges under good light before first use, then rinse with a liquid suitable for your method. After filling, confirm that the sample region is evenly covered, the stopper seats without forcing and the cell sits squarely in the holder.

Fit and optical alignment

The uncapped cell dimensions are 3 × 12.5 × 45 mm, and the rectangular body height is 35 mm. Use those dimensions to check holder seating, side clearance and the space available above the cell before the stopper is fitted.

These dimensions apply to the uncapped cell. The stopper adds a top element, but the capped height is not specified here. Z Height is also not stated, so instruments or holders that depend on a defined beam-center height should be checked before ordering.

Solvents and cleaning

This cuvette is listed with Molded 83. In MQ selection guidance, this fabrication type is often chosen for methods involving organic solvents or temperature-controlled use, but the exact chemical limits for this assembled cell are not specified here.

Check your sample, rinse solvent and cleaning routine against the complete assembly before routine use. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue.

Included with this option

1 cuvette per listed price unit. A closure is included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

For a different design, send a drawing or describe the change you need. Custom JGS1 quartz enquiries are assessed separately from this listed specification; feasibility, quantity, price and timing are confirmed in the project quotation.