(C104SS26) Quartz Micro Cuvette, 10 mm Path, 1.05 mL

Weight	30 g

SKU: C104SS26

Original price was: $132.00.Current price is: $119.00.

In Stock

C104SS26 is a JGS1 quartz micro cuvette for fluorescence spectroscopy with a 10 mm optical path, Four-Way Light access and 1050 µL nominal capacity. This version uses a 3 mm sample-region width in a compact stoppered format, balancing a defined illuminated region with more nominal capacity than narrower-channel options. Sold per piece as 1 cuvette, with a closure included.

In Stock

SKU: C104SS26 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104SS26 is a stoppered JGS1 quartz micro cuvette for fluorescence spectroscopy when you need a 10 mm path in a compact closed cell. It combines Four-Way Light geometry with a 1050 µL nominal capacity and a 3 mm sample-region width, giving you a defined measurement region with more nominal volume than the narrower versions in the same family. This listing is sold as 1 cuvette, with a closure included.

Path Length: 10 mm
Sample Volume (Nominal): 1.05 mL
Closure Type: Stopper

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Optical Window Dimensions	3 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.05 mL
External Dimensions	12.5 × 12.5 × 45 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Stopper
Closure Included	Yes
Fabrication Method	Standard 80
Detection Channel Width	3 mm

Choose this option

Choose C104SS26 when you want a 10 mm fluorescence cuvette with optical access from multiple sides and a moderate-width sample region in a closed-top format. The 3 mm sample-region width and 1050 µL nominal capacity suit methods that need a compact micro cuvette but do not need the narrowest internal channel in this series.

What makes this option different

10 mm optical path for fluorescence methods built around this standard path length.
Four-Way Light geometry for side access beyond a simple two-face transmission layout.
1050 µL nominal capacity with a 3 mm sample-region width for a defined but less narrow illuminated liquid region.
JGS1 quartz body in a 12.5 × 12.5 mm base format, supplied as 1 cuvette with closure.

Using this cell

Fill the cell so the illuminated section is fully covered with liquid and free of bubbles or residue. The 1050 µL figure is the nominal cell capacity rather than a minimum working fill, so your actual fill level should be set by beam position and measurement orientation.

After filling, seat the closure gently and keep the optical faces clean. For consistent fluorescence work, use the same orientation for blank and sample runs so the same faces and internal sample region are presented to the instrument each time.

First-use check

Inspect the optical faces, edges and top opening before use. Rinse with a suitable mild liquid for your method, place the cell in the holder, and run a blank to confirm clean beam passage through a fully filled region without visible bubbles.

Fit and optical alignment

The stated external size is 12.5 × 12.5 × 45 mm, with a 12.5 × 12.5 mm base. That helps you check holder footprint and general clearance, but the available data do not establish whether the 45 mm dimension should be treated as body-only or closure-inclusive.

Z Height is not listed for this SKU, so outer size alone should not be used to assume beam-center alignment in a specific fluorimeter or holder. The stated 3 mm sample-region width is relevant if your setup uses a tight beam and you want to judge how much filled sample width is available in the illuminated area.

Solvents and cleaning

This cuvette uses adhesive-bonded quartz construction and is listed under Standard 80. In practice, this is the better fit for routine room-temperature water-based samples and buffers. Avoid organic sample solvents and organic cleaning agents with this construction.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe optical faces gently with non-abrasive optical tissue. Wider chemical compatibility limits for the full assembly are not established here for this SKU.

Included with this option

Supplied as 1 quartz micro cuvette. A closure is included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes to dimensions, optical path length, sample volume, optical windows, Z Height, closures and related tolerances. Send a dimensioned drawing or labelled sketch, together with holder details, sample conditions and target quantity. Discuss your requirements and quote part number C104SS26.