(C104SR15) Quartz Stoppered Cuvette, 10 mm Path, 3.5 mL

Weight	30 g

SKU: C104SR15

Original price was: $109.00.Current price is: $99.00.

In Stock

C104SR15 is a quartz stoppered cuvette with a 10 mm optical path, Four-Way Light geometry and 3.5 mL nominal capacity. The included PTFE stopper provides covered top access, and this listing is supplied as 1 cuvette per price unit. Its four optical sides suit setups that need more than one viewing or beam direction around the same cell body.

In Stock

SKU: C104SR15 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104SR15 is a quartz stoppered cuvette with a 10 mm optical path, Four-Way Light geometry and 3.5 mL nominal capacity. It gives you a covered top-opening format together with optical access on all four vertical sides of the cell body. The PTFE stopper is included, and this listing is supplied as 1 cuvette per price unit.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Stopper

Selection Specifications

Product Kind	Cuvette
Cell Type	Stoppered Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Sample Volume (Nominal)	3.5 mL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
Overall Height without Closure	45 mm
External Dimensions Scope	Uncapped Cell
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Closure Type	Stopper
Closure Material	PTFE
Closure Included	Yes

Choose this option

Choose C104SR15 when you want one quartz cuvette with a stopper and four-side optical access in the common 10 mm path format. This makes it a practical choice for methods that rely on standard 10 mm transmission but also need controlled orientation or side optical access around the sample cell.

What makes this option different

10 mm optical path for methods built around the common 10 mm cuvette standard.
Four-Way Light geometry for optical access on all four vertical sides.
PTFE stopper included for direct top filling and covered sample handling.
3.5 mL nominal capacity for routine liquid work in this cell size.
12.5 × 12.5 × 45 mm uncapped body so holder fit and top clearance can be checked separately.
Sold as 1 cuvette per price unit for single-cell purchasing.

Using this cell

Fill the cell so the liquid level covers the beam region used in your instrument, then seat the PTFE stopper gently. For blank and sample measurements, keep the cuvette orientation consistent and remove bubbles or exterior droplets from the optical faces before placing the cell in the holder.

The stopper provides a covered closure for normal handling, but this page does not state a pressure limit or leak-tight rating. Select it as a stoppered sample cuvette, not as a pressure-rated process component.

First-use check

Inspect the quartz faces, edges and opening on arrival.
Rinse the cell with a suitable liquid for your method before first use.
Check holder fit with the uncapped body, then confirm clearance for the stopper in place.
After filling, verify that the selected beam path will pass fully through the liquid column.

Fit and optical alignment

The uncapped body dimensions are 12.5 × 12.5 × 45 mm, with a 12.5 × 12.5 mm base. Use these dimensions to check holder seating and body clearance, and leave extra space above the holder because the stated height does not include the stopper.

Z Height is not stated for this SKU. If your instrument depends on a specific beam-center height, check that requirement before ordering instead of relying only on the outer body dimensions. Reference drawings collected for this SKU are available in the product images.

Solvents and cleaning

This cuvette uses a quartz body and includes a PTFE stopper. Do not use hydrofluoric acid on quartz, and avoid hot strong alkalis and abrasive cleaning.

The chemical limits for the complete assembly are not specified here, so if your sample, rinse solvent or cleaning method is demanding, check suitability for the exact liquids and conditions you plan to use. Clean the optical faces gently with non-abrasive optical tissue. For general fabrication background, see MQ Cuvette Fabrication Glossary.

Included with this option

1 cuvette per listed price unit. Closure included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a related quartz cuvette with different dimensions, path length, capacity, optical windows, Z Height or closure details, we can review a custom version. Send your drawing or labelled sketch, instrument or holder information, sample conditions and required quantity through https://machinedquartz.com/contact/, and refer to part number C104SR15.