(C104TE3) Quartz Screw-Top Cuvette, 10 mm Path

Weight	30 g

SKU: C104TE3

Original price was: $352.00.Current price is: $317.00.

In Stock

C104TE3 is a JGS1 quartz screw-top cuvette with a 10 mm optical path and Four-Way Light access for fluorescence spectroscopy setups with compatible beam geometry. Its large-neck, screw-top form gives direct sample access before the closure is fitted. The listed price is for one cuvette, with closure included.

In Stock

SKU: C104TE3 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104TE3 is a JGS1 quartz screw-top cuvette with a 10 mm optical path and Four-Way Light access for fluorescence spectroscopy methods that use a compatible beam geometry. This is the large-neck screw-top option. Fill through the opening and fit the accompanying closure when your handling procedure calls for a covered cell.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	Fluorescence Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Sample Volume (Nominal)	3.5 mL
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Closure Included	Yes

Choose this option

Choose C104TE3 when you need a 10 mm path in a closed screw-top format rather than an open-top sample chamber. Use the large-neck option when that opening format is required by your method; check the neck and closure clearance against your setup. The Four-Way Light configuration is relevant when your method uses side optical access, but the required beam height and holder fit still need to match your instrument.

What makes this option different

10 mm optical path for methods written around the common 1 cm path length.
Four-Way Light configuration provides optical access on more than one axis, which is useful for fluorescence spectroscopy arrangements with matching illumination and collection geometry.
Large-neck screw-top option provides access to the sample region before the closure is fitted.
Screw-top handling allows the opening to be covered after sample preparation; the measurement procedure determines when the closure is used.
JGS1 quartz body supports quartz-cell use where your method calls for this material grade.

Using this cell

Fill the cell through the screw-top opening and make sure the liquid level covers the measurement region required by your method. Remove visible bubbles before measurement, especially if your optical setup reads across the side windows.

Keep the measurement direction and seating position consistent between blank and sample. Handle the optical faces carefully and avoid touching them during filling or closure handling.

First-use check

Inspect the optical faces and the screw-top closure area before first use. Seat the cell in your holder, verify beam alignment with your intended setup, and run a blank using the actual liquid for the method.

Fit and optical alignment

This SKU is a screw-top cuvette, but the external body dimensions and Z Height have not been confirmed for this option. If your holder has limited clearance above the cell, a fixed beam-center height, or tight side supports, check those fit points before ordering.

Four-Way Light describes the supported optical access category, not automatic compatibility with every fluorescence spectrometer. Match the cell to your holder, beam position and collection geometry.

Solvents and cleaning

See cuvette fabrication methods for general construction guidance across different cell types.

Chemical limits are not established here for the complete wetted assembly, so check sample and cleaning conditions if your method involves demanding solvents, elevated temperature or extended contact time. Keep hydrofluoric acid away from quartz, and avoid hot strong alkalis and abrasive cleaning.

Clean optical faces gently with non-abrasive optical tissue and a suitable non-abrasive cleaning liquid for your process.

Included with this option

The listed price is for 1 cuvette.

Priced and sold as 1pc/ea. Closure included.

Availability and ordering

Order this listed specification directly, or ask about current availability and dispatch. If your delivery date is important, ask before checkout; preparation or production time is separate from transit and customs clearance.

Discuss a custom version

For a different design, send a drawing or describe the change you need. Custom JGS1 quartz enquiries are assessed separately from this listed specification. Feasibility, quantity, price and production time are confirmed in the project quotation.